x470 Taichi bios 3.10
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=11278
Printed Date: 27 Dec 2024 at 5:22am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: x470 Taichi bios 3.10
Posted By: paologab
Subject: x470 Taichi bios 3.10
Date Posted: 09 Apr 2019 at 8:59pm
|
is out. Anyone flashed it? any impressions or missed functions? Is with x470 like b450 non allowed the bios downgrade? ------------- AMD Ryzen 7 2700X w/Wraith prism x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
Replies:
Posted By: Wandererqq
Date Posted: 09 Apr 2019 at 10:54pm
| I had just flash my bios to 3.10. I had noticed that some options from the bios menu have been removed. Also for some reason it doesnt allow high oc through PBO as before even tho the good thing is that my cpu 2700x is running about 10C cooler than before since it doesnt boost to 4.3+ but around 4-4.1 on all cores. |
Posted By: kschendel
Date Posted: 10 Apr 2019 at 1:14am
|
According to a post in one of the sticky threads, in fan control, Monitor CPU now means Tctrl, and there's no longer an option to monitor the (broken) CPU thermistor. It also says that the fans don't change as rapidly with Tctrl variations, not sure of details. Since I just this week finally stabilized my machine after the 2.0 BIOS, I think I'll leave it alone for a while. :-) |
Posted By: paologab
Date Posted: 10 Apr 2019 at 1:26am
Hi I saw that post, so is confirmed the same behaviour ------------- AMD Ryzen 7 2700X w/Wraith prism x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
kschendel wrote:Posted By: paologab
Date Posted: 10 Apr 2019 at 1:31am
Yes it?™sgood but they sold it @ 3.7/4.3... ------------- AMD Ryzen 7 2700X w/Wraith prism x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
Posted By: gizmic
Date Posted: 10 Apr 2019 at 12:48pm
|
my system havent hit 4.3 since spring started and i havent even change bios ------------- 
|
Posted By: paologab
Date Posted: 10 Apr 2019 at 3:50pm
|
so we're even at the moment, two guys with an all ok update here and two guys with big problems in the sibling B450 thread... I'll wait too ------------- AMD Ryzen 7 2700X w/Wraith prism x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
Posted By: paologab
Date Posted: 11 Apr 2019 at 2:22pm
|
I've taken a breath and I 've updated to 3.10. All went smoothly  Re-set custom fan curves to my previous preferences and tested with stress-ng matrix. The tdie temp is lower under steady 100% cpu load. From my point of view It takes much more time tu rise. I didn't tested the pbo/xfr because I don't have something like ryzen master in linux ------------- AMD Ryzen 7 2700X w/Wraith prism x470 Taichi bios 3.50 16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC) M.2 970 EVO, SATA SSD, 2 SATA HDD AMD Radeon RX 580 8G OC Linux Kernel 5.4 Manjaro Stable XFCE |
Posted By: Tekelope
Date Posted: 11 Apr 2019 at 11:18pm
|
Dr debug led stopped working. Always show AA. Before it can show Tctl temp. How to show cpu temp now? ಥ_�&forumCodes=True |
Posted By: kurokeita
Date Posted: 15 Apr 2019 at 6:33pm
| Hi guys, so I've downloaded the new BIOS setup zip from asrock website, but whenever I try to flash it (using the Windows setup version), it would throw a warning "ROM file information does not match system BIOS". I've installed the AMD all in 1 with VGA driver ver:18.50.16.01_WHQL and I'm on BIOS version 2.00 . Have any of you encountered this warning, and should I do it? |
Posted By: Wandererqq
Date Posted: 15 Apr 2019 at 10:11pm
| I think it's better to update it from the bios boot screen instead of Windows. |
Posted By: Wandererqq
Date Posted: 15 Apr 2019 at 10:17pm
| 4-6 cores I have seen 4.2-4.3 but with the current phone profile (they make it less aggressive with vcore) never seen it on all cores running more than 4.1 |
Posted By: kurokeita
Date Posted: 15 Apr 2019 at 10:41pm
Yeah, I updated from BIOS and it went well. |
Posted By: Dircos6
Date Posted: 17 Apr 2019 at 11:58pm
| I noticed that before the screen logo was Asrock|Sapphire and now only Asrock, and in UEFI Utility Update the "Internet Flash" option is disappeared |
Posted By: J Z
Date Posted: 18 Apr 2019 at 4:55pm
|
http://forum.asrock.com/forum_posts.asp?TID=11278&title=x470-taichi-bios-310 ------------- Kind Regards, JZ https://shop.JZelectronic.de - Der Shop mit ausgesuchter ASRock Profi Hardware https://www.facebook.com/asrock.de |
Posted By: Wandererqq
Date Posted: 18 Apr 2019 at 11:48pm
| Just use ryzen master and increase EDC to 157 (at least on my build with that number never pass 1.425vcore) and I'm seeing a small increment about 100mhz on all cores |
Posted By: merasil
Date Posted: 19 Apr 2019 at 2:57pm
| since bios 3.10 i noticed that the pbo doesnt work well anymore. Before 3.10 it was on 4.15-4.2Ghz on all cores with everything set on auto and now its just on 3.9Ghz. Damn anoying... |
Posted By: merasil
Date Posted: 19 Apr 2019 at 5:18pm
|
Sorry to say that, but this bios is garbage.... i've tested it quite a bit now and i cant get a stable oc with it. Before i could ez (and rockstable, tested with p95) run 4.2Ghz at 1.41V and now it crashes if i start cinebench. If i use XFR/PBO it boosts the single cores at 4.3Ghz at 1.5V and uses 3.9Ghz on all cores if on load at 1.3V. Before it was 1.38V at 4.1Ghz on all cores with XFR/PBO. Pls fix this crap... or let us downgrade to previos bios |
Posted By: XmanSE
Date Posted: 20 Apr 2019 at 10:05am
|
I Updated to bios 3.20, because with 3.10 my system randomly hang with a black screen and a post code 00, this never never happend with 2.0, i hope this fix it. ------------- X470 Taichi | Ryzen 9 3900X | 8x2 GSkill Trident Z RGB | Asus Strix RTX 2080ti | Samsung 970 Evo+ | EVGA 750 GQ |
Posted By: kilyan
Date Posted: 23 Apr 2019 at 10:17pm
Same here, it's not boosting at all...NOW ASROCK YOU HAVE TO FIX IT AND LET US DOWNGRADE YOUR BUGGED BIOS. |
Posted By: kilyan
Date Posted: 23 Apr 2019 at 10:19pm
Also 3.20 does the same sh*t, it's not boosting |
Posted By: kilyan
Date Posted: 23 Apr 2019 at 10:46pm
I'm happy if someone tells me how to fix it manually with amd ryzen master, i'm completely noob. |
Posted By: Joykill3r
Date Posted: 18 May 2019 at 7:00pm
| Yep, Major issue with 3.20 I so should not of upgraded but thought it would fix some issues I was having. No Idea why ASRock chooses not to have downgradable flash or a backup BIO's Literally should be a standardized architecture for mobo's. Its 2019! |
Posted By: Joykill3r
Date Posted: 18 May 2019 at 7:03pm
Damn this forum is also out of date.. Not even an option to edit your posts lol. Unless I missed it somewhere. Basically, I'm getting an VFIO error, Unable to power on device stuck in D3. I doubt anyone from their support team cares about any of these posts. But ill try anyway. Considering the following.. 1: HTTPS isnt used on forums. 2: Forum looks like its from the 00s. |