B650E PG Riptide USB error 43
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=113268
Printed Date: 21 Jul 2025 at 6:16am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: B650E PG Riptide USB error 43
Posted By: Antis
Subject: B650E PG Riptide USB error 43
Date Posted: 20 Jul 2025 at 8:06pm
|
I have a question regarding the Asrock B650E PG Riptide WiFi, but first a few trifle: 1) How can I make sure that when I turn on the fans, they don't howl at 100% for a few seconds? I'm not turning on a vacuum cleaner, after all. 2) Why is a successful BSOD run accompanied by one long beep and not one short one like everyone else? Ok, now a question: After turning on the PC and after some (inconstant) time, there is a sound of the device being disconnected and in the manager, one of the USB controllers is disconnected with error 43. After rebooting, it starts working again. What could it be? |
Replies:
Posted By: Xaltar
Date Posted: 20 Jul 2025 at 11:41pm
|
As far as I am aware there is no way to control the fans until the BIOS initializes the controllers have no input until this happens and thus the fans operate at 100% until the controller receives a command to lower the speed. For the beep, try disconnecting your keyboard and powering on. If the long beep is gone then you may have a stuck key, if not then make sure your RAM is properly inserted into slot B2 (if a single stick) or slots A2 and B2 (for 2 modules). As for the USB, I am not sure, I have not encountered the issue myself. You can try disconnecting all USB devices other than keyboard and mouse and test if the issue persists. I have seen quite a few USB peripherals cause conflicts and issues with the USB controllers on various systems. ------------- 
|