Question ERROR: 5 beeps with no video output - Int
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=11356
Printed Date: 22 Dec 2024 at 1:53pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Question ERROR: 5 beeps with no video output - Int
Posted By: mauriciognr
Subject: Question ERROR: 5 beeps with no video output - Int
Date Posted: 23 Apr 2019 at 12:24am
|
Hello. I have an Asrock H61M-DGS with a Core i5-3475S, 8 gb of ddr3 RAM and a Corsair cx600 psu. I have an nvidia GT210 and a GTX260, with both of them i've always force-enabled the Intel HD 4000 (iGPU MultiMonitor support in BIOS) to run a second monitor out of the VGA port of the motherboard and also to have QuickSync available to record in OBS. All good until i installed a new AMD RX 460 from Gigabyte. The iGPU options are gone from the BIOS so i cant run the second monitor out of the VGA port and dont have quicksync canymore Also if i try to boot the PC without a graphics card i get a 5 beep with no video output. So far i've tested both sticks of ram one by one on each slot (they're fine) and already tried restoring BIOS defaults and removing CMOS the battery. Edit 1: I already have the latest BIOS (v1.60), but flashed it anyway. Still 5 beeps no video out of the iGPU Edit 2 Took the motherboard out and I am now testing with only with PSU keyboard and one display. Each one of the cards are booting ok, iGPU is still missing from Bios and i still get a 5 beep error if no card is plugged. Edit 3: Added some images. If they dont load please use this link: https://imgur.com/gallery/ALR2dLP This is how it was before. I was able to enable the iGPU to use multi-monitor and QuickSync. If i removed the graphics card the iGPU would kick in and run the main display as it shuld be.  This is what my BIOS shows now, theres no mention of the iGPU on the northbridge configuration (thats where the iGPU settings were before), also in Primary graphics adapter the only option is PCI Express. And like i said, if i turn on the PC without any of the graphics card it wont boot and will give the 5 beep error.  PD: Nevermind the yellow vertical line, thats my second/spare monitor and has that problem. |
Replies:
Posted By: RLGL
Date Posted: 24 Apr 2019 at 1:34am
|
Clear your bios settings and try again ------------- Asrock Z370 Gaming K6,Intel i7 8700K, Asrock x570 Taichi |
Posted By: mauriciognr
Date Posted: 24 Apr 2019 at 4:28am
| I've done that already. Several times |
Posted By: mauriciognr
Date Posted: 25 Apr 2019 at 11:03pm
| Anyone? Bump! |
Posted By: Redburpalert
Date Posted: 14 Sep 2023 at 11:20am
|
Im sorry if late, but i am encountering the same exact issue you had. still, no fix on mine. im wondering if you managed to fix it? i am starting to loose hope because i did every possible fix i could and fix you made on yours. I5 3470 Asrock h61m dgs 8gb ram single stick |