After update bios no screen
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=11417
Printed Date: 03 May 2024 at 7:49pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: After update bios no screen
Posted By: Xyothine
Subject: After update bios no screen
Date Posted: 02 May 2019 at 2:32pm
|
Today I update bios to 4.90 via instant flash. But after restart, my AB350 Gaming-ITX/ac board does not display and just restart loop. How can I do now? |
Replies:
Posted By: ASRock_TSD
Date Posted: 02 May 2019 at 5:58pm
|
Dear Xyothine, Greetings, this is ASRock TSD. Regarding your question, we provide some suggestions for verifying: 1. Please refer to user manual page.18 to clear CMOS. http://asrock.pc.cdn.bitgravity.com/Manual/Fatal1ty%20AB350%20Gaming-ITXac.pdf 2. Please re-plug the power code to the motherboard and then check again. If the problem stills the same, please contact your distributor or dealer for further help. Thanks! All the best, ASRock TSD |
Posted By: FireMrshlBill
Date Posted: 02 May 2019 at 11:24pm
| If the clearing cmos doesn't work (use the jumper on the board), try taking out one of your memory sticks. Then after it loads (make sure you do not have an XMP profile loaded), shut down and put the other stick back in and then go back in bios and load whatever XMP profile (or manually OC your ram). I am having to do that now after flashing my Fatal1ty AB350 itx/ac to 5.60 (which has other issues, so I wouldn't go over 5.30 for now). |
Posted By: _Mael_
Date Posted: 03 May 2019 at 1:41am
ASRock, who the hell test this BIOS ? 
|
Posted By: xhue
Date Posted: 03 May 2019 at 4:41am
I'd put my money on 'nobody'. 
|
_Mael_ wrote: