Z270M Pro4 - secondhand Nvme EVO 960
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=11468
Printed Date: 20 Apr 2024 at 1:50am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z270M Pro4 - secondhand Nvme EVO 960
Posted By: Shedt
Subject: Z270M Pro4 - secondhand Nvme EVO 960
Date Posted: 12 May 2019 at 10:43pm
I?™ve done everything I can think of.
In the system browser, both slots list the drive as
Mass storage controller
I don?™t know if it should list the drive by name Samsung 960 EVO
I don?™t know if this is because the drive is second hand, is the uefi information on the drive wrong?
Secure boot?
Maybe I need to try and flash it?
Samsung flash when booted from USB does not detect drive, I will try again with CSM disable, I think I tried it before.
No matter what win10 install does not see the drive. Tried a different ISO, newest preview build.
I mean if it is bricked I should see nothing?
I?™ve reset BIOS, followed everything....
I will check my voltages.
I can only think it is dead, or I have a bent pin? I bought this board secondhand, with 3 bent pins in the area of RAM I fixed them as best as I can and I have had no problems...
I rather not take my CPU out...
CPU cooler too tight?
|
Replies:
Posted By: Shedt
Date Posted: 12 May 2019 at 10:48pm
I just want to say I somewhat suspect a BIOS problem, sometimes I get corrupting in the boot menu when I press F11
I need to move the mouse around to cover the graphics error.
I?™ve reflashed my BIOS from the first oldest BIOS up, each one, until again I am on the newest.
I just don?™t know if it is my BIOS/ uefi info is messed, or the drive is second hand and needs to be wiped in a way I don?™t know about.
I will post on Samsung?™s forums
|
|