Print Page | Close Window

775i65G R3.0

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1148
Printed Date: 23 Dec 2024 at 11:38am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: 775i65G R3.0
Posted By: rwjacobs
Subject: 775i65G R3.0
Date Posted: 03 Nov 2015 at 1:24am
Intel E3500 2.7GHz is shown on the supported list of processors for the above mentioned mainboard, but system will not post. I've tried 2 new mainboards, and 3 new E3500 chip-sets with no luck. I can use older 775 processors and the mainboard will post fine. Seems to me it is a Bio's revision issue but all I see in rev 1.0 which is what the sticker on the 775i65G shows.  Any ideas??



Replies:
Posted By: ASRock Expert
Date Posted: 03 Nov 2015 at 4:45am
Is Your PCB black or blue?

The blue one is Rev 1.0, and the black one is Rev 3.0.

The Rev 3.0 does not need any BIOS upgrade,
and the Rev 1.0 officially does not support E3500.

So, You can only ask ASRock TSD if it is possible on the Rev 1.0 to make a BIOS
for supporting any Wolfdale Intel CPU's. 


-------------
990FX Extreme 9 MOD P1.70
AMD FX 8120 4GHz 1.25V
Thermalright HR-02
Patriot Viper 2x4GB 2133MHz
Samsung 850 EVO 250GB
MSI R7970 TFIII 3GB
CORSAIR VX550W
LanCool K62 Dragonlord
ASUS Xonar D2X


Posted By: rwjacobs
Date Posted: 03 Nov 2015 at 4:56am
PCB 1.0 or PCB 3.0?



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net