ASRock RBG Sync & X399M Taichi
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=11631
Printed Date: 28 Jul 2025 at 5:26am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASRock RBG Sync & X399M Taichi
Posted By: roderrooder
Subject: ASRock RBG Sync & X399M Taichi
Date Posted: 10 Jun 2019 at 3:01pm
|
I can't seem to get RBG Sync to open on my brand new X399M Taichi... when I try to open it it says "This utility is not for this platform!" I've found a few posts saying you need to re-flash the chip or something, but when I try to do that I get a giant FAIL message: ---------------------------------------------------------------------- wICPFLASHADSB v1.0.7 - ASRock Incorporation, all rights reserved ---------------------------------------------------------------------- Project Name = X399M Taichi BIOS Version = P3.50 Reading file: nu51_2.08...0...ok. Enter ICP mode. Company ID: 0x000000DA, Device ID: 0x00210050 Erasing: EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE Programming: PPPPPPPPPPPPPPPPPPPPPPPPPPP Verifying: VVVVVVVVVVVVVVVVVVVVVVVVVVV Exit ICP mode. Program done. This project name not in the ini file. ######## ### #### ## ## ## ## ## ## ## ## ## ## ## ###### ## ## ## ## ## ######### ## ## ## ## ## ## ## ## ## ## #### ######## CheckSum: 40E3 Any help would be much appreciated. |
Replies:
Posted By: gizmic
Date Posted: 11 Jun 2019 at 3:12pm
|
i'm guessing you didnt download the rgb sync from your boards page because it has to be that exact location for it to contain the correct bin files ------------- 
|