AMD Motherboards - Pc not booting after win update x470 taichi

Print Page | Close Window

Pc not booting after win update x470 taichi

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=11642
Printed Date: 28 Jul 2025 at 6:07am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Pc not booting after win update x470 taichi

Posted By: kilyan
Subject: Pc not booting after win update x470 taichi
Date Posted: 12 Jun 2019 at 3:03pm

HI,I'm on windows 10.Yesterday after a cumulative windows update, the pc required a restart, i was still on build 1809. From that time the pc is not booting anymore with a 0d or 0b error on the motherboard, sometimes 3 sounds come out from it. i had not the time to check yet because it happened this morning, and had to get to workplace, using work pc to write. Apparently was all good: fans spinning, lights on, there was electricity. But is like this electricity can't go to the mouse, keyboard and monitor, they not power on. Anyone experienced this unpleasent event and how to solve it? Can really a software update not involwing drivers or firmwares break a pc so badly? what the hell! thanks for the help you will give me.

Replies:

Posted By: gizmic
Date Posted: 12 Jun 2019 at 5:22pm

just sounds like you have unstable ram

-------------

Posted By: kilyan
Date Posted: 12 Jun 2019 at 5:47pm

gizmic wrote:

just sounds like you have unstable ram

But until yesterday all was good, until i didn't press restart and update...
anyway the ram is stock and i adeed my pc specs in signature

-------------
OS:WINDOWS 10 64
CPU:RYZEN 2700X + WRAITH PRISM
RAM:2X8GB FLARE-X 3200MHZ XMP PROFILE
MOBO:X470 TAICHI BIOS 3.43
GPU: EVGA GTX 1080 SC
PSU:ANTEC EDGE 650W 80+ GOLD

Posted By: kilyan
Date Posted: 12 Jun 2019 at 7:42pm

btw i don't receive reply notifications on my mail, even if i'm subscribed to the topic

-------------
OS:WINDOWS 10 64
CPU:RYZEN 2700X + WRAITH PRISM
RAM:2X8GB FLARE-X 3200MHZ XMP PROFILE
MOBO:X470 TAICHI BIOS 3.43
GPU: EVGA GTX 1080 SC
PSU:ANTEC EDGE 650W 80+ GOLD

Posted By: gizmic
Date Posted: 12 Jun 2019 at 9:37pm

remove your windows drive and if it boots without beeping then you are right

either set a higher ram voltage or lower the ram frequency

-------------

Posted By: kilyan
Date Posted: 12 Jun 2019 at 9:44pm

kilyan wrote:

btw i don't receive reply notifications on my mail, even if i'm subscribed to the topic

now i received it, weird. Anyway i will first try to unplug the ssd with the os and seeif at least boots the peripheals.

-------------
OS:WINDOWS 10 64
CPU:RYZEN 2700X + WRAITH PRISM
RAM:2X8GB FLARE-X 3200MHZ XMP PROFILE
MOBO:X470 TAICHI BIOS 3.43
GPU: EVGA GTX 1080 SC
PSU:ANTEC EDGE 650W 80+ GOLD

Posted By: kilyan
Date Posted: 13 Jun 2019 at 1:44am

well i managed to boot the pc via cmos reset button...when i did again my settings it didn't boot again. So i reset it again, it booted and tried to leave PBO auto, not enabled as it used to be, and now boots everytime. SO YOU ASROCK TECHNICIANS THAT MADE THIS BIOS, IT WAS SUPPOSED TO FIX PBO, it worked very well so far, BUT HOW THE HELL NOW THIS SETTING DOESN'T ALLOW MY PC TO BOOT???? HOW IS THIS EVEN POSSIBLE???? I think the bios is bugged, or bugs after some uses, i don't know, is for asrock to find out.

-------------
OS:WINDOWS 10 64
CPU:RYZEN 2700X + WRAITH PRISM
RAM:2X8GB FLARE-X 3200MHZ XMP PROFILE
MOBO:X470 TAICHI BIOS 3.43
GPU: EVGA GTX 1080 SC
PSU:ANTEC EDGE 650W 80+ GOLD

Posted By: gizmic
Date Posted: 13 Jun 2019 at 2:22am

not all cpu made the same lessen the cpu voltage offset so that it can boot

-------------

Posted By: kilyan
Date Posted: 13 Jun 2019 at 2:38am

gizmic wrote:

not all cpu made the same lessen the cpu voltage offset so that it can boot

And why before as it was PBO ENABLED worked, and now i have to increase voltage to make it boot with PBO ENABLED? this doesn't make any sense! anyway i don't know about this cpu voltage offset, how to set it and what value set

-------------
OS:WINDOWS 10 64
CPU:RYZEN 2700X + WRAITH PRISM
RAM:2X8GB FLARE-X 3200MHZ XMP PROFILE
MOBO:X470 TAICHI BIOS 3.43
GPU: EVGA GTX 1080 SC
PSU:ANTEC EDGE 650W 80+ GOLD

Posted By: kilyan
Date Posted: 13 Jun 2019 at 2:55pm

So pbo enabled now works if i add more voltage, i don't know if it's worth

-------------
OS:WINDOWS 10 64
CPU:RYZEN 2700X + WRAITH PRISM
RAM:2X8GB FLARE-X 3200MHZ XMP PROFILE
MOBO:X470 TAICHI BIOS 3.43
GPU: EVGA GTX 1080 SC
PSU:ANTEC EDGE 650W 80+ GOLD

Posted By: gizmic
Date Posted: 13 Jun 2019 at 3:40pm

because enabling pbo will offset your cpu to -0.1v mine doesnt boot at that voltage

-------------