No screen after BIOS boot
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=11653
Printed Date: 28 Jul 2025 at 6:06am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: No screen after BIOS boot
Posted By: kurono
Subject: No screen after BIOS boot
Date Posted: 14 Jun 2019 at 3:48pm
Dear forum,
Recently i change BIOS settings and after that my computer (A320M-HDV) doesn't turn on.
Just no screen but my mouse keyboard lights up and fan spin.
Help how can i solve this.
Thank you
|
Replies:
Posted By: paologab
Date Posted: 14 Jun 2019 at 3:57pm
did you take to the default settings the bios *before* updating it?
anyway, being late to do so, try resetting the cmos with the switch or by pulling out the battery and the socket wall
-------------
AMD Ryzen 7 2700X w/Wraith prism
x470 Taichi bios 3.50
16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC)
M.2 970 EVO, SATA SSD, 2 SATA HDD
AMD Radeon RX 580 8G OC
Linux Kernel 5.4
Manjaro Stable XFCE
|
Posted By: ASRock_TSD
Date Posted: 14 Jun 2019 at 4:08pm
Dear kurono,
Greetings, this is ASRock TSD.
Referring your question, we provide some suggestions for verifying:
1. Please refer to user manual page 26 to clear CMOS.
http://asrock.pc.cdn.bitgravity.com/Manual/A320M-HDV.pdf
2. Please install only one memory module to different memory slots.
3. Please use different memory modules to verify.
4. Please re-install the CPU.
5. Please remove all of other devices and only leave the CPU, one memory module to verify. (If the CPU does not have integrated graphic, please install graphics card)
?»Please make sure to unplug power cable first when perform the steps above.
?»Please make sure that all of the components are well-fitted to the motherboard.
Thanks!
All the best,
ASRock TSD
|
|