Killer Sli 370x - Will not save any BIOS changes t
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=11676
Printed Date: 28 Jul 2025 at 11:26am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Killer Sli 370x - Will not save any BIOS changes t
Posted By: kchip187
Subject: Killer Sli 370x - Will not save any BIOS changes t
Date Posted: 18 Jun 2019 at 2:52am
|
So, I built this for my son about 6 months ago with Ryzen 1600 and HyperX 2333. This weekend we were trying some tweaking in BIOS and I followed some youtube guides for this board. Seemed very straight forward. Proved anything but. 3 Beeps followed by one beep and restart. I had to reset the cmos jumper to get it to post again. Returned to defaults, reboot, then back into BIOS and tried a very simple OC of cpu and upped the vcore to 1.3v. No changes to memory speed or timings. System reboots, then back to windows, the CPU-Z, which reports stock clocks. Rinse repeat about 4 more times - same outcome. NO OC So I updated BIOS as per the instructions, up to v 5.10. Same outcome - NO OC in CPU-Z. What the heck am I missing? Ps- Ive build and OC'd 10-15 gaming rigs. Not a newb, just newb to asrock ;/ Thanks in advance! Chip ------------- CGH |
Replies:
Posted By: kchip187
Date Posted: 18 Jun 2019 at 8:18am
|
shameless bump ------------- CGH |
Posted By: kchip187
Date Posted: 21 Jun 2019 at 7:29am
|
No help from asrock here??? ------------- CGH |
Posted By: gizmic
Date Posted: 21 Jun 2019 at 11:41am
|
how are you even overclocking obviously its not a bootable settings which make its revert to safe defaults. ------------- 
|
Posted By: kchip187
Date Posted: 21 Jun 2019 at 8:28pm
|
IN BIOS - setting frequency to 3.6 ghz, Dram settings default speed 2666mhz, bumped vcore to 1.3v. Save settings, exit Reboots fine, but GPU-Z reporting 3.2 Ghz Updated BIOS as instructed to v5.10. Tried again, same result. No overclock. Tried increasing DRAM volts to 1.35, reboots fine , no overclock No matter what I do, I end up back at Default speeds. ------------- CGH |