Hi all,
i just build a new pc system and have big issues with system stability. The system crashes in differenet situations (sometimes at OS start or after 2 hours even when theres no application running).
The I get followong error codes (bluescreen): PAGE FAULT IN NON PAGED AREA, DRIVER_IRQL_not_less_or_equal, PFN_LIST_CORRUPT or MEMORY MANAGEMENT
This components are build in the system:
- Asrock Taichi X399 Bios Ver. P3.50
- AMD Threadripper 1920X
- G.Skill 32GB Quad-Channel Mode (F4-2400C15Q-32GFT)
- AMD Radeon RX Vega64
- Power: be quiet powerzone 850W
- OS: Windows 10 Pro on a Kingston 240GB SSD via SATA
Today i just reinstalled the whole system and changed to a brandnew SSD (before there was a SanDisk). Then I installed all the drivers from the asrock website, installed the newest Radeon Vega64 driver and checked all drivers for updates.
I did some stresstest on CPU, GPU and RAM and all works fine. I also did a system file ckeck (command: sfc/scannow) and a memory check (command: mdsched) and there were no problems.
But when I restart or wait for 2-3 hours, the system crahses and randomly shows one of the bluescreens I mentioned above.
After reboot there's the info message in windows that the "Radeon Wattman settings were restored to default because of a system crash".
When I check (command: eventvwr.exe) i can see in the system report that there a some failure codes:
0x0000000a (0xffffb00d4dc34514, 0x0000000000000002, 0x0000000000000001, 0xfffff8063f886fd8).
I really tried updating all drivers, running older gpu drivers and also did system restore twice but nothing works.
What can I do to find out what the problem is here?
Thank you
|