AMD Motherboards - sli / xfire power connector

Print Page | Close Window

sli / xfire power connector

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1181
Printed Date: 27 Jul 2024 at 2:59pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: sli / xfire power connector

Posted By: Gman
Subject: sli / xfire power connector
Date Posted: 07 Nov 2015 at 3:42am

I just got my Fatal1ty Killer board, and I see where it says to use this power connector if you run 2 or more cards, my question is, is there any benefit of using this connector if you only have 1 card, ie: xtra or more solid power?.

Replies:

Posted By: ASRock Expert
Date Posted: 07 Nov 2015 at 7:29pm

If You have a solid PSU, You should be good without it.

If You have a bad PSU - just change it, for a better future.

So, for one PCI-e GPU, You are fine with the PCI-e power provided by the MBO via 24+8pin.

-------------
990FX Extreme 9 MOD P1.70
AMD FX 8120 4GHz 1.25V
Thermalright HR-02
Patriot Viper 2x4GB 2133MHz
Samsung 850 EVO 250GB
MSI R7970 TFIII 3GB
CORSAIR VX550W
LanCool K62 Dragonlord
ASUS Xonar D2X

Posted By: Xaltar
Date Posted: 07 Nov 2015 at 8:06pm

There is no benefit from using it with a single card as far as I have seen in testing on my own systems.