Cannot boot from M.2
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=12115
Printed Date: 27 Dec 2024 at 9:37am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Cannot boot from M.2
Posted By: Yannoss
Subject: Cannot boot from M.2
Date Posted: 06 Aug 2019 at 11:10am
Hi,
My motherboard AB350 Gaming-ITX/ac will not use the AST280 240G M.2 as boot drive.
I am able to install windows 10 on the drive. But cannot boot from it and get BSOD.
Is it board problem or M.2? what else can I do now?
Best regards
|
Replies:
Posted By: ASRock_TSD
Date Posted: 06 Aug 2019 at 12:24pm
Dear Yannoss,
Greetings, this is ASRock TSD.
According to your question, we provide some suggestions for verifying:
1. Please enter to BIOS setup and load BIOS default setting via [F9] key.
2. Under Advanced tab>Storage device, please check if the M.2 SSD is recognized.
3. Please press [F11] key during post screen to access Boot Menu; make sure the M.2 SSD is detected.
If the M.2 SSD is detected by BIOS, this indicates there's no firmware or HW issue.
Please try to re-install a clean Windows 10 OS to the M.2 SSD; If possible, please use another Windows 10 installation media to verify.
Thanks!
All the best,
ASRock TSD
|
Posted By: Quesada
Date Posted: 05 Aug 2023 at 10:15am
|
So I was trying all these fixes but nothing. Personally what fixed it was the NVME Sanitation tool located in the BIOS. Run it with the format setting. If not, check the gen used by the SSD and the motherboard and configure accordingly.
|
Posted By: M440
Date Posted: 05 Aug 2023 at 7:32pm
If you are making full install of windows 10/11 it should be writing UEFI boot entries, but I would check that.
-------------
asrock b650m/hdv.m2, ryzen 7700x@85watt
|
|