new build hiccups
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=12174
Printed Date: 27 Dec 2024 at 4:15pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: new build hiccups
Posted By: riido
Subject: new build hiccups
Date Posted: 12 Aug 2019 at 10:24am
friends, well getting to be more like large burps at this point.. new build that took a bit to get going but then ran great (passmark 6504) for a week plus.. seems like issues came back after i tried running three monitors off my gpu.. went to bsod after that.. has always showed some debug codes, now showing many.. wouldn't post for a couple of days; pulled cpu and reset, went down to one stick of ram, ended up starting up to windows 10 out of the blue.. went to start up again the next day and no post again.. have set cmos via jumper method many times now.. have unplugged everything but cpu and one ram.. starts up, shuts down and restarts after 20 seconds, tries it again and again.. too many debug codes (33, 7a, 36, 27, 69 and others that go by too fast to read.. had just reset the cpu again a bit ago and one stick ram, showed no codes but also wouldn't post.. at start of build did have a bent pin on the cpu but fixed that easily and it worked after that.. it's weird to try many things and no post, then try it again and it went to windows and worked for a day; now won't post again.. nothing seems consistent.. i've followed most suggestions for this from forum posts; but nothing seems to help.. any ideas on which direction i should take this?? any help appreciated..
ryzen 3700x, asrock x470 taichi, 32gb corsair dominator 3200 c16 @ 2666, evga 280 clc, evga gtx 1660 sc, evga 750 g2 psu (only thing not new but worked in old computer) samsung 970 evo plus 500gb m2...
|
Replies:
Posted By: ThreeDee
Date Posted: 12 Aug 2019 at 11:16am
what are temps when it BSOD's? I have the 3400g in my wifes setup and it was hard locking and then upon reboot temps in BIOS seemed really high... ( I was trying to use a thermal pad and went to artic silver and dropped temps 20c ..sheesh .. that'll teach me).
I'd say load up latest bios if there is an update, but if you are that unstable it could brick your board
-------------
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|