My computer won?™t boot, memory problem?
Printed From: ASRock.com
Category: Media&User's Review
Forum Name: AMD Motherboards
Forum Description: ASRock AMD Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=12218
Printed Date: 09 Nov 2024 at 7:11am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: My computer won?™t boot, memory problem?
Posted By: MrChrisJr
Subject: My computer won?™t boot, memory problem?
Date Posted: 16 Aug 2019 at 7:49am
|
Currently writing this on my phone as my computer is unable to boot. So the computer I have has the following: ryzen 2600 cpu, rx 570 graphics card, an a320m-HDV motherboard, and recently added memory that is 2x8 3200mz Geilspear ram. I saw my ram was not running to its full potential so I went to the bios switched it to the only xmp profile and then set the vram speed to 3200 mz. The computer worked before with the new ram but now that I changed this it boots to a black screen and I am not able to access anything. Was wondering if there was a way I could manually reset the bios from this motherboard but I didn?™t find anything in the manual. Please help I?™ve spent a lot of money on this computer and it is necessary for schooling and would just suck to have all this money go down the drain. Appreciate you!
|
Replies:
Posted By: requiem4adream
Date Posted: 18 Aug 2019 at 2:40am
|
Find the CMOS jumper on your motherboard and try shortcutting it with a screwdriver or a cap thingy. That should reset it to default values.
|
Posted By: MrChrisJr
Date Posted: 19 Aug 2019 at 12:12am
|
Thank you! I was eventually able to clear the cmos by removing the battery on the pegs where it says, CLRCMOS1 and then I held the power button down for 10 seconds (with everything disconnected, no power going into system) and then putting it back on the same pegs. After the restart it booted and I was able to access the bios. Turns out the motherboard I have can?™t support GEIL ram over 2400 MHz and I had set it at 3200. Hopefully this helps someone else.
|
|