Print Page | Close Window

Z170 Extreme 7+ & Samsung M2 SSD 950 Pro

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1223
Printed Date: 23 Dec 2024 at 3:58pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Z170 Extreme 7+ & Samsung M2 SSD 950 Pro
Posted By: ken_bs
Subject: Z170 Extreme 7+ & Samsung M2 SSD 950 Pro
Date Posted: 12 Nov 2015 at 11:23pm
I installed Windows 10 smoothly on the Samsung 950 Pro, and then connected a SATA drive.
All runs smooth, but not as fast as should.



On Advanced\Storage Configuration SATA Mode Selection AHCI (Changing to RAID and Windows fail to load, weather M2_1 RST PCIe enabled or not).

On Tool\System Browser the M2 shows, but the model is never recognized (as the rest of the installed hardware).

Tool\Boot Manager Default boot device is M.2 SSD (N1-Samsung SSD 950 Pro 256GB)

Boot tab: Boot Option Priorities: Boot Option 1 N1-Samsung SSD 950 Pro 256GB
Fast Boot Disabled
CSM > Launch Storage OpRom Policy: Legacy Only. When trying to change to UEFI only, startup fails and the 950 Pro is not recognized by UEFI.

Any chance to fix this, or will I have to reinstall Windows after setting the UEFI Launch Storage OpRom Policy to UEFI only?

Ken



Replies:
Posted By: ken_bs
Date Posted: 13 Nov 2015 at 3:11pm
I guess it was a desperate call after installing and setting my new computer 48 hours.
on UEFI, Tools the SSD model still doesn't show, boot priorities on boot and tool are not the samet. Few Windows installations that broke in the middle.
At the end the system works fast as should.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net