XMP Unstable, B450 Steel Legend BIOS 2.6
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=12276
Printed Date: 09 Feb 2025 at 2:06pm Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: XMP Unstable, B450 Steel Legend BIOS 2.6
Posted By: Irfaanm
Subject: XMP Unstable, B450 Steel Legend BIOS 2.6
Date Posted: 23 Aug 2019 at 4:44pm
I cannot set my XMP Profile for my Corsair 3200mhz Ram :( I get blue screen errors, very unstable.
I'm on Bios 2.60 B450M Steel Legend.
Ram specs: CMU16GX4M2C3200C16 (2x8gig sticks) 16gb total
CPU: r5 3600 stock Mobo: B450m Steel Legend Bios 2.60
Any idea on when will a more mature bios be released ?
|
Replies:
Posted By: Ray62
Date Posted: 24 Aug 2019 at 10:14pm
Nobody knows, if there will be a bios supporting this RAM out of the box. Maybe the next bios can help.
This RAM is not on the QVL, neither on the lists of other boards. You can try it with XMP for the next lower frequency and if it does not work, use the next lower... Or do the same WITHOUT XMP. And check the RAM voltage set to 1.35V If success, make stress tests to ensure stability.
Or try the DRAM Calculater and read the howto's https://www.overclock.net/forum/13-amd-general/1640919-new-dram-calculator-ryzena-1-6-0-3-overclocking-dram-am4-membench-0-8-dram-bench.html
------------- Asrock Fatal1ty X370 Professional Gaming Offline Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE
|
Posted By: Po145
Date Posted: 06 Oct 2019 at 7:35am
I can?™t answer for 2.6 BIOS because my board (albeit the full size and not the m) came pre installed with 2.7, but I couldn?™t get it to go any higher then 2733.
I ended up switching the modules to slots a2 and b2 and tried the xmp profile again, and they started running flawlessly at 3200.
|
Posted By: Ray62
Date Posted: 06 Oct 2019 at 7:24pm
Po145 wrote:
I ended up switching the modules to slots a2 and b2 and tried the xmp profile again, and they started running flawlessly at 3200. | That is the recommend RAM slot setting for ALL Ryzen boards using 2 sticks. Didn't you read the manual? Anyway, good that you get it to work now as it should.
------------- Asrock Fatal1ty X370 Professional Gaming Offline Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE
|
|