X570 Steel Legend BIOS update
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=12446
Printed Date: 31 Jul 2025 at 2:19pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X570 Steel Legend BIOS update
Posted By: kgiesselman
Subject: X570 Steel Legend BIOS update
Date Posted: 17 Sep 2019 at 1:43am
So I finally got my X570 Steel Legend to boot. Problem was the video card (ASRock RX 5700).
As I am running a Ryzen 3600X, I updated the BIOS to 1.7 via Easy Update. The update appeared to go normally but now I am in a boot loop. Have tried clearing the CMOS but no joy so far.
I know the old first gen Ryzens would go through this multiple reboot thing but I haven't heard about the gen 3 Ryzens doing this.
Suggestions?
|
Replies:
Posted By: kgiesselman
Date Posted: 17 Sep 2019 at 1:51am
|
The post status checker is red. I haven't changed any hardware. The manual doesn't give any indication of how to read the PSC.
|
Posted By: kgiesselman
Date Posted: 17 Sep 2019 at 3:20am
Wow, this is a cranky motherboard. Reflashed to v1.7 and got into BIOS. The CPU is burning up so going to figure that out next.
|
Posted By: kgiesselman
Date Posted: 17 Sep 2019 at 6:25am
Wow, think I am over the hump now. Got Windows 10 x64 installed. Boot still slow, board blinks and flashes like crazy. I hope it figures out the hardware at some point and has a faster boot.
The ASRock X570 motherboard just doesn't like the ASRock RT5700. I have tried the graphics card in my ASRock X470 and it boots just fine. Put it in the X570 and we get a non-starter. I have an 8 prong and 6 prong power plugged into the graphics card. Suggestions?
|
|