HyperX RAM XMP profile not working
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=12570
Printed Date: 01 Aug 2025 at 10:30am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: HyperX RAM XMP profile not working
Posted By: madeasman89
Subject: HyperX RAM XMP profile not working
Date Posted: 02 Oct 2019 at 1:20am
|
I got a second 2x8 kit of the same model, HyperX Predator 3200mhz, for my Asrock X470 Master board but the XMP profile won't load anymore. This kit was from the boards QVL and the first 2x8 kit I have loads fine but when adding another 2x9 it's not working. Stays stuck at 2400mhz. Is there a way to fix this so all sticks run at 3200mhz? Do I need to manually raise the voltages?
|
Replies:
Posted By: Ray62
Date Posted: 02 Oct 2019 at 3:18am
As the QVL says, 3200mhz is only valid for 2 sticks in dual channel.
Maybe DRAM voltage 1.36...1.37V can help.
And you can try to fix it by reaching this frequency or one, two steps down by choosing the required settings for the DRAM timings, sub timings, voltages and the other things.
To get familiar with Ryzen DRAM settings, use the DRAM Calculator with it's articles, howto's and the results from other user.
https://www.overclock.net/forum/13-amd-general/1640919-new-dram-calculator-ryzena-1-6-2-overclocking-dram-am4-membench-0-8-dram-bench.html
-------------
Asrock Fatal1ty X370 Professional Gaming Offline
Under test:
MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE
|
|