M.2 NVME Boot
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=12800
Printed Date: 03 Aug 2025 at 8:33pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: M.2 NVME Boot
Posted By: Sammychops92
Subject: M.2 NVME Boot
Date Posted: 03 Nov 2019 at 6:32pm
Hi,
Have a Asrock B450M Steel Legend.
New setup with Ryzen 2600 etc etc.
I have an Adata xpg sx6000 m.2 NVME 256gb.
The mobo will not recognise the m.2 at all.
Plugged into ultra m.2.
- Tried it in my own computer and it works
- Tried another m.2 in the new computer and it is not recognised
- Tried disabling CSM
Nothing works.
Any ideas?
|
Replies:
Posted By: Ray62
Date Posted: 03 Nov 2019 at 6:51pm
Use the mainboard just only with the GPU and the M2 drive.
Load bios defaults, set CSM to disabled, save and restart and boot from a windows USB installation stick to see if you can choose the m2 drive for setup.
-------------
Asrock Fatal1ty X370 Professional Gaming Offline
Under test:
MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE
|
Posted By: Sammychops92
Date Posted: 03 Nov 2019 at 7:41pm
|
Yep!! Tried that. I installed windows onto a HDD however that is completely disconnected at the psu and also mobo sata. Cam disabled. Uefi defaults and nothing..
|
Posted By: Ray62
Date Posted: 03 Nov 2019 at 8:20pm
Check Bios Version, 2.32 is probably the best for Ryzen 2600.
And at least: Contact Asrock support.
-------------
Asrock Fatal1ty X370 Professional Gaming Offline
Under test:
MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE
|
|