x470 pcie lane issues with matisse
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=12833
Printed Date: 19 May 2024 at 3:57am Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: x470 pcie lane issues with matisse
Posted By: polpo
Subject: x470 pcie lane issues with matisse
Date Posted: 08 Nov 2019 at 4:26pm
Hello. I am facing some problems with pcie lanes in my current Taichi ultimate x470 build.
Specs here: - Taichi ultimate X470 (with BIOS P3.30) - Ryzen 3900X 12-core 24-thread - Nvidia MSI GeForce GT 1030 2GB LP (PCI-e 3.0 x16) - Dell Perc H310 in IT-mode (PCI-e 2.0 x8)
I started my build with some earlier BIOS version and Ryzen 1700, and updated the BIOS to P3.30 by following the instructions. Then I upgraded the CPU to the Ryzen 3900x and the system was working.
The GPU was installed on the PCIE1 slot and it was working. Then I added H310 card to the PCIE3 slot and I couldn't get image to the screen from the GPU at PCIE1. I read about the pcie-lanes on this motherboard and I realized it has some auto feature which turns PCIE3 and PCIE1 to x8 mode if there is card in both of these slots.
But as far as I am aware the GPU should be working even if it's 8x lanes. I tested the GPU by putting it into the PCIE5 slot (which has x4 slots) and it worked without problems.
In the last test I set the GPU alone in the PCIE3 slot and got no image. Could this be something related to the BIOS or faulty pci-e lane? Or am I just missing something?
Greetings Polpo
|
Replies:
Posted By: Ray62
Date Posted: 08 Nov 2019 at 6:08pm
You have to switch the two PCIe slots in 2x8 mode in the bios, i think. Should be under Advanved\AMD PBS\PCIe x16/2x8 Switch
------------- Asrock Fatal1ty X370 Professional Gaming Offline Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE
|
Posted By: polpo
Date Posted: 09 Nov 2019 at 3:28am
Problem solved with the help of comment above.
Some notes what happened: - I switched to 2x8 mode and booted with 2 pcie cards attached. It cleared bios settings for some reason and could not get image to screen. - Switched again to 2x8 mode and set some of the other settings at the Advanced\AMD PBS\ to auto and it started working.
Thanks!
|
|