Allocating VRAM GPU
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD and Intel Graphics Card
Forum Description: Question about ASRock AMD and Intel graphics card
URL: https://forum.asrock.com/forum_posts.asp?TID=12855
Printed Date: 15 Dec 2024 at 7:11am Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Allocating VRAM GPU
Posted By: vanderweyden
Subject: Allocating VRAM GPU
Date Posted: 12 Nov 2019 at 9:40pm
Dear All,
I'm not sure but the memory I allocate (4gb) for my videocard does not correspond with the memory shown in Windows 10 (2gb). Any ideas?
Regards,
Hardware: - Motherboard: ASROCK a320M-HDV (with UEFI A320M-HDV P6.00 - GPU: AMD Ryzen 5 2400g - Memory: Corsair Vengeance LPX - DDR4 16gb 3000mhz
|
Replies:
Posted By: ASRock_TSD
Date Posted: 14 Nov 2019 at 10:01am
Dear Vanderweyden,
Thank you for posting your query to ASRock forum. This is technical support from ASRock forum.
Regarding your question about onboard graphics memory, when allocating more than 2GB memory, CSM support needs to be disabled.
Please refer to the following link for further details. https://www.asrock.com/support/faq.asp?id=464
With thanks, ASRock TSD
|
Posted By: vanderweyden
Date Posted: 14 Nov 2019 at 8:34pm
Dear Sir,
Thanks for the reply, but it seems I'm unableto to disable to CSM support. If I do my system restarts and automatically opens the BIOS.
Nor am I able to go to "OC Tweaker\OC Mode Change Switch\AMD CBS Setting"
Regards,
|
Posted By: ASRock_TSD
Date Posted: 15 Nov 2019 at 4:24pm
Dear Vanderweyden,
Will the system go into BIOS at all?
If you are not able to go into BIOS, please remove the HDD/SSD from your system and try.
With thanks, ASRock TSD
|
Posted By: vanderweyden
Date Posted: 15 Nov 2019 at 6:47pm
Yes, after disabling CSM support and restarting my computer it automatically opens the BIOS/UEFI (I don't even have to press "DEL" or whatsover).
|
Posted By: ASRock_TSD
Date Posted: 15 Nov 2019 at 7:16pm
Dear Vanderweyden,
It is normal that the system will enter BIOS when HDD is removed.
If installing the HDD/SSD will the same behavior happen, please make sure that the HDD/SSD is formatted as GPT. By installing the Win10 while CSM is disabled will assure that your HDD/SSD is installed in GPT format.
With thanks, ASRock TSD
|
|