Z390 Extreme 4 m.2 and Sata drives
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=13017
Printed Date: 21 Dec 2024 at 10:39pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z390 Extreme 4 m.2 and Sata drives
Posted By: renew
Subject: Z390 Extreme 4 m.2 and Sata drives
Date Posted: 02 Dec 2019 at 11:03am
In another post I read "Regarding your question, only
the SATA type M.2 connects to M2_1 will disable the SATA3_1 port.
If you are using the PCIe NVMe type M.2 at M2_1, all 4 SATA ports can be used."
====================
Hi, I have a Z390 Extreme 4
I tried to install a 970 EVI NVMe M.2 at M 2_1 and M 2_2
Both times other Sata drives were disabled.
I thought if it was an NVMe it would not disable.
Any thoughts, any way to get all the drives to work?
Thanks
|
Replies:
Posted By: ASRock_TSD
Date Posted: 03 Dec 2019 at 3:05pm
Dear Renew,
Thank you for posting your query to ASRock forum.
This is technical support from ASRock.
Regarding your question, Z390 Extreme4 motherboard has the specification of:
-M2_1, SATA3_0, and SATA3_1 share lanes.
-M2_2, SATA3_4, and SATA3_5 share lanes.
Thus, if M.2_1 slot is used SATA3_0/SATA3_1 will be disabled.
And if M.2_2 slot is used SATA3_4/SATA3_5 will be disabled.
With thanks,
ASRock TSD
|
Posted By: MaximeG
Date Posted: 10 Dec 2020 at 7:11am
Are both port capable of the same speed ? (i.e. PCIe Gen3 x4) or is it one with this speed and the other one with SATA3 only ?
I'm trying to see if it's interesting to make a raid 0 with these 2 ports.
Thanks !
MaximeG
|
Posted By: ASRock_TSD
Date Posted: 10 Dec 2020 at 3:48pm
Dear Renew,
Thanks for posting again.
The speed of both M.2 will be the same when using PCIe M.2.
With thanks,
ASRock TSD
|
|