Intel Motherboards - H81M-DG4 CPU Updated List

Print Page | Close Window

H81M-DG4 CPU Updated List

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1310
Printed Date: 23 Dec 2024 at 7:27pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: H81M-DG4 CPU Updated List

Posted By: FlorinL
Subject: H81M-DG4 CPU Updated List
Date Posted: 23 Nov 2015 at 2:44am

Hi, I wish to have an updated CPU list for the specified model MB.
It seems that other H81M series MB's supports more processors than this, and in Intel site on compatible MB's all presented CPU's as compatible by Asrock site does not include H81M-DG4 model.

Please advice!

Replies:

Posted By: FlorinL
Date Posted: 23 Nov 2015 at 2:50am

Are Haswell Celeron G1820 and G1840 on 1150 soket on the supported CPU list?
What about Pentium G3260 and G3460?

Posted By: wardog
Date Posted: 23 Nov 2015 at 5:34am

Myself not bot being an ASDRock employee ...............

The 1.10 BIOS for your MB states "Update microcode 19." and as I know this was the updated code that prevented that nasty G3258/Windows 10 overclock killing KB update Microsoft released.

So yes, in my humble knowledge I'd bet they are.

But, I would advise/urge you to contact ASRock Tech Support http://event.asrock.com/tsd.asp" rel="nofollow - HERE and inquire first though.

Posted By: wardog
Date Posted: 23 Nov 2015 at 5:35am

Oh, please. For my own knowledge, would you reply back what the Tech's say.

Posted By: Xaltar
Date Posted: 23 Nov 2015 at 6:35am

Wardog is correct, the only BIOS update available for that board is to disable non-Z overclocking to allow windows 10 to operate on the system. It would seem that the board has slipped through the cracks with regards to CPU support updates. I did note there is one Haswell refresh CPU listed but none of the others are.

I would also recommend you contact ASRock tech support with the issue.

Posted By: FlorinL
Date Posted: 23 Nov 2015 at 3:11pm

Thank you, I sent request and we are expecting feed back from them.