Getting errors BCh and C0h
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=13107
Printed Date: 06 Aug 2025 at 2:21am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Getting errors BCh and C0h
Posted By: samvc
Subject: Getting errors BCh and C0h
Date Posted: 11 Dec 2019 at 2:12pm
I'm very afraid this is very bad, but I'd like to give it a try nonetheless. I'm getting error codes BCh followed by C0h when I boot the system. C0 apparently means the CPU failed to initialize, while I can't find any information about BCh. These are the relevant specs:
Does anybody know what's happening? Do I need to re-seat the CPU or does that not make any difference? Any help is more than appreciated. I'll continue to update this post with more information later on. |
Replies:
Posted By: samvc
Date Posted: 11 Dec 2019 at 2:39pm
| Ok, so I anxiously thought I applied too much pressure to the Corsair H100i v2 liquid cooler but apparently you have to apply a ton of pressure to break the CPU in its socket. This leaves me without a clue as to what is happening. Has anyone ever encountered similar errors? |
Posted By: samvc
Date Posted: 11 Dec 2019 at 2:53pm
Found the problem  I just had to apply more pressure to the RAM. I knew it was tight, but damn I underestimate it every time.
|