(Solved)Samsung Evo 970 Plus on Z97 Killer
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=13132
Printed Date: 09 Dec 2024 at 6:04am Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: (Solved)Samsung Evo 970 Plus on Z97 Killer
Posted By: mihaela
Subject: (Solved)Samsung Evo 970 Plus on Z97 Killer
Date Posted: 13 Dec 2019 at 6:52am
Hello, I have a Fatal1ty Z97 Killer mobo and i want to install on it a Samsung 970 EVO Plus, 500GB, NVMe, M.2.
I've read that NVMe is not supported as a boot drive on Z97 chipsets , is it true?
I will install Win 8.1 on it.
Maybe looks like a waste of money but soon i will upgrade the PC and i want to use this SSD.
Thanks
|
Replies:
Posted By: ASRock_TSD
Date Posted: 18 Dec 2019 at 10:29am
Dear Mihaela,
Welcome to ASRock forum. It is a great place to get answers for your question.
Regarding your question, yes, Z97 Killer will support 970 EVO Plus. BIOS is required to be updated to 2.50.
Please note that the speed of M.2 on Z97 Killer will not reach to maximum speed since M.2 slot supports up to speed of Gen2 x2.
If there are any further questions, please fill out the ASRock technical form, they shall provide further assistance. https://event.asrock.com/tsd.asp?ln=en
With thanks, ASRock TSD
|
Posted By: mihaela
Date Posted: 19 Dec 2019 at 3:53am
Posted By: mihaela
Date Posted: 19 Dec 2019 at 7:53am
How about this one? SSD Intel 660p Series 1TB PCI Express 3.0 x4 M.2 2280 I know the speed is limited at 10Gb, but will it work? PCI Express 3.0 x4 in PCI Express Gen2 x2
many thanks
|
Posted By: ASRock_TSD
Date Posted: 24 Dec 2019 at 4:12pm
Dear Mihaela,
Thanks for the feedback.
We do not have the 660p series, but we checked similar 600P series M.2 instead.
And it can be detected under the BIOS/Win10.
Hopefully, the information above helps.
With thanks, ASRock TSD
|
Posted By: JerryWest_44
Date Posted: 29 Jan 2020 at 12:14pm
ASRock_TSD wrote:
Dear Mihaela,
Welcome to ASRock forum. It is a great place to get answers for your question.
Regarding your question, yes, Z97 Killer will support 970 EVO Plus. BIOS is required to be updated to 2.50.
Please note that the speed of M.2 on Z97 Killer will not reach to maximum speed since M.2 slot supports up to speed of Gen2 x2.
If there are any further questions, please fill out the ASRock technical form, they shall provide further assistance. https://event.asrock.com/tsd.asp?ln=en
With thanks, ASRock TSD |
I have a Z97 Killer Fatal1ty SN: 45M0XD018617 BIOS: 2.60
Win 7 - 64 bit I7-4790 16GB DDR3
Storage: Samsung 840 EVO 250GB via SATA Video: Onboard
I installed a Samsung 970 EVO plus 1TB into the M2 slot. However, Storage M2 is not recognized by the BIOS; however, the NVME Controller recognized it.
Please advise.
v/r
Joe
|
Posted By: JerryWest_44
Date Posted: 30 Jan 2020 at 12:39am
I have a Z97 Killer Fatal1ty SN: 45M0XD018617 BIOS: 2.60
Win 7 - 64 bit I7-4790 16GB DDR3
Storage: Samsung 840 EVO 250GB via SATA Video: Onboard
I installed a Samsung 970 EVO plus 1TB into the M2 slot. However, Storage M2 is not recognized by the BIOS; however, the NVME Controller recognized it.
In addition in the boot options page the 970 EVO plus shows up but the legacy 840 EVO does not.
Please advise.
v/r
Joe
|
Posted By: JerryWest_44
Date Posted: 31 Jan 2020 at 1:09am
JerryWest_44 wrote:
I have a Z97 Killer Fatal1ty SN: 45M0XD018617 BIOS: 2.60
Win 7 - 64 bit I7-4790 16GB DDR3
Storage: Samsung 840 EVO 250GB via SATA Video: Onboard
I installed a Samsung 970 EVO plus 1TB into the M2 slot. However, Storage M2 is not recognized by the BIOS; however, the NVME Controller recognized it.
In addition in the boot options page the 970 EVO plus shows up but the legacy 840 EVO does not.
Please advise.
v/r
Joe |
Solved ---
The M2 status is for M2 SATA SSD cards not NVME. However the NVME configuration page shows the new 970 EVO plus. Since I have Win7 all I needed was to install Samsung's NVME driver (since these are not part of Win7). Once I installed the drivers, all I had to do is initialize the volume and format the new SSD drive via the Disk Manager -- then I cloned a copy of my older 840 EVO to the new 970 EVO. I rebooted and voila. I'm now booted to me new 1TB 970 EVO plus SSD drive.
|
Posted By: w3rty88
Date Posted: 22 Mar 2020 at 5:31pm
hello guys :) this is my first post. i bump the thread because I have a similar problem.
http://forum.asrock.com/forum_posts.asp?TID=13895&PID=73713𑿱
|
Posted By: mihaela
Date Posted: 13 Mar 2021 at 4:13am
Finally I bought a ADATA XPG SX8200 Pro 1TB, NVMe, M.2. I see it in BIOS under Advanced/ NVMe config NVME tab but i cannot see it under Storage config and my other 2 HDDs are gone.
I have a SATA3 Samsung Evo 840 and 4 other SATA3 HDDs, i see that the mobo can have 6 SATA3, what am I missing£
thanks !
https://ibb.co/pK3jCRQ" rel="nofollow - https://ibb.co/pK3jCRQ https://ibb.co/Z2RY9bN" rel="nofollow - https://ibb.co/Z2RY9bN
|
Posted By: mihaela
Date Posted: 13 Mar 2021 at 5:45am
nvm,
The M.2 Socket, SATAE_4, SATAE_5 and SATA Express share lanes. If either one of them is in use, the others will be disabled.
solved
|
Posted By: tolya21
Date Posted: 21 Jun 2022 at 4:01pm
Hello! Bought nvme samsung oem. For a long time I tried to connect 2 hdd and dvd-rw. As a result, we managed to leave 1 HDD and nvme. How can this problem be solved? 1 hdd is not enough
|
Posted By: mihaela
Date Posted: 22 Jun 2022 at 3:59am
The M.2 Socket, SATAE_4, SATAE_5 and SATA Express share lanes. If either one of them is in use, the others will be disabled. read the manual and see the pictures!
|
|