AMD Motherboards - Taichi x399 help plz

Print Page | Close Window

Taichi x399 help plz

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=13204
Printed Date: 26 Dec 2024 at 6:59pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Taichi x399 help plz

Posted By: Dcmegacab
Subject: Taichi x399 help plz
Date Posted: 19 Dec 2019 at 2:51am

Hi. I have the Taichi X399 mobo. I just installed my 1920X CPU yesterday. I was having trouble latching the TR chip down and I ended up holding the chip in place and screwing it down. I did about 4 turns on each screw. I think I'm only supposed to screw it down 3 turns but it looked like it needed to be screwed down quite a bit to make contact.

Replies:

Posted By: Dcmegacab
Date Posted: 19 Dec 2019 at 2:54am

And how do the fan hubs work on the Taichi x399? Do chassis fan headers 1 and 2 have pwm? I see they have 4 pins but I'm not sure if the pwm works on the chassis fan headers. I'm using a phanteks fan hub and it says in the hub manual that my hub only works on cpu fan header because the cpu fan header is the only header with pwm.

Posted By: Ray62
Date Posted: 19 Dec 2019 at 5:52pm

TR mounting:
https://www.amd.com/de/support/kb/faq/cpu-install-tr
https://www.asrock.com/microsite/AMDX399CPU/index.asp

FANS:
I don't think that the phanteks fan hub manual knows which mainboard you are using... ;-)
A look into the Taichi X399 manual shows that the CPU FAN and Chassis FAN3 support PWM.

-------------
Asrock Fatal1ty X370 Professional Gaming Offline
Under test:
MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE