Intel Motherboards - B365M-HDV ahci to intel rst

Print Page | Close Window

B365M-HDV ahci to intel rst

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=13270
Printed Date: 04 Aug 2025 at 12:40pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: B365M-HDV ahci to intel rst

Posted By: Lennart
Subject: B365M-HDV ahci to intel rst
Date Posted: 28 Dec 2019 at 8:55am

Installed win10 in AHCI mode with intel M2 MVme attached by cloning ssd to M2. No problems Everything works. However, I then found that that I can change the sata settings in the bios from ahci to intel rst raid. aiming for best possible performance I Tried it, but it wouldn't boot. I remember the same situation when changing from ide to sata, however, then there was a way around it. I read somewhere that it was possible to boot in safe mode first and then as normal. However, I wouldn't be surprised if that resulted in a whole host of misery. Probably the right way to do it is to clone averything back to the ssd, change the ahci mode to intel rst raid (guess that it doesn't matter that it is raid), and then clone back to the m2 drive. Any other settings I need to change in BIOS? If I do all that will I still be able to see my sata ssd in windows? Hope someone has been in a similar situation and can help me out here.

Replies:

Posted By: Lennart
Date Posted: 02 Jan 2020 at 6:55am

Anyone any ideas?