HTPC&Gaming Barebone&Others - A300 -Windows will not boot after BIOS update

Print Page | Close Window

A300 -Windows will not boot after BIOS update

Printed From: ASRock.com
Category: Technical Support
Forum Name: HTPC&Gaming Barebone&Others
Forum Description: Question about HTPC&Gaming Barebone&Others
URL: https://forum.asrock.com/forum_posts.asp?TID=13279
Printed Date: 22 Nov 2024 at 1:23am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: A300 -Windows will not boot after BIOS update

Posted By: IgJe
Subject: A300 -Windows will not boot after BIOS update
Date Posted: 28 Dec 2019 at 10:45pm

Hi.

I'm using A300 for few months now, today I,ve updated bios to 3.6 from 3.5 and since than is always booting only into bios.

1. Using M2 SSD, looks like system is not deteting it, therefore windows not loading
2. I,ve tried many bios settings, no change
3. Opened case, removed M2 are put back in - no change
4. Tried going back to 3.5 bios - no change

Please advise if there is any bios setting that could overwrite it

thanks

Replies:

Posted By: ASRock_TSD
Date Posted: 31 Dec 2019 at 10:03am

Dear IgJe,

Thank you for choosing ASRock.

If your Windows is install at GPT mode, please set the Windows boot manger to the first boot device.
If your system is install at MBR mode, please set the system SSD to the first boot device.

Thanks!
Yours truly,
ASRock TSD