G.SKILL F4-3200C16D-16GTZRX @ ASRock Fatal1ty B450
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=13301
Printed Date: 08 Aug 2025 at 3:36am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: G.SKILL F4-3200C16D-16GTZRX @ ASRock Fatal1ty B450
Posted By: Dedalus
Subject: G.SKILL F4-3200C16D-16GTZRX @ ASRock Fatal1ty B450
Date Posted: 31 Dec 2019 at 10:42am
|
Hi. I have built this system: -Motherboard: ASRock Fatal1ty B450 Gaming K4. -CPU: Ryzen 7 2700. -GPU: GTX 1060, 3GB. -RAM: G.skill Tridentz Rgb 16gb (2 X 8gb) 3200 Mhz- For Amd (G.SKILL F4-3200C16D-16GTZRX). -SSD: Ssd Wd 240gb Green M.2 Western Digital. -Power supply: Evga Bronze 600w 80 Plus 49amp. -Chassis: Thermaltake V100 Black Mid Tower 1. I'm running on ubuntu 18.04 LTS system. I have updated the UEFI to version P3.40 (first was P1.50, then I've installed P1.80, and then P3.40). Althought I have tried to change the memory speed to the 3200Mhz that Gskill says are tested on ryzen cpus, the system gives this information: $ sudo dmidecode --type 17 # dmidecode 3.1 Getting SMBIOS data from sysfs. SMBIOS 3.2.1 present. # SMBIOS implementations newer than version 3.1.1 are not # fully supported by this version of dmidecode. Handle 0x0015, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x0014 Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: DIMM 0 Bank Locator: P0 CHANNEL A Type: DDR4 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 2133 MT/s Manufacturer: Unknown Serial Number: 00000000 Asset Tag: Not Specified Part Number: F4-3200C16-8GTZRX Rank: 1 Configured Clock Speed: 2133 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x0018, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x0017 Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: Unknown Set: None Locator: DIMM 1 Bank Locator: P0 CHANNEL A Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: Unknown Serial Number: Unknown Asset Tag: Not Specified Part Number: Unknown Rank: Unknown Configured Clock Speed: Unknown Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Handle 0x001A, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x0019 Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: DIMM 0 Bank Locator: P0 CHANNEL B Type: DDR4 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 2133 MT/s Manufacturer: Unknown Serial Number: 00000000 Asset Tag: Not Specified Part Number: F4-3200C16-8GTZRX Rank: 1 Configured Clock Speed: 2133 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x001D, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x001C Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: Unknown Set: None Locator: DIMM 1 Bank Locator: P0 CHANNEL BConfigured Clock Speed: 2133 MT/s Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: Unknown Serial Number: Unknown Asset Tag: Not Specified Part Number: Unknown Rank: Unknown Configured Clock Speed: Unknown Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown How can I make it work at the desired 3200Mhz frequency? I have tried accessing the UEFI, and putting 3200 in there (there are other options, up to 4000Mhz). I haven't touched the 1.2 Voltage, should I specify another votage instead of the default 1.2V? |
Replies:
Posted By: gizmic
Date Posted: 31 Dec 2019 at 11:37am
|
go in to uefi enable XMP it should work switching it to 3200 doesn't make it work there are timings, voltages and speed involved by setting xmp it sets those things for you ------------- 
|
Posted By: Dedalus
Date Posted: 01 Jan 2020 at 2:00am
| I've done that, loaded the XMP, which was in auto, and put it into profile 1. But stills showing the same information, same voltages and everything. |