B150M-HDV - BSOD on install
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1351
Printed Date: 11 May 2025 at 3:24am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: B150M-HDV - BSOD on install
Posted By: atamoro_ITA
Subject: B150M-HDV - BSOD on install
Date Posted: 27 Nov 2015 at 10:45pm
|
Goodmorning, I assembled a pc like: b150m-hdv+i5-6400-+4Gb kingston KVR21N15S8/4(from official memory list) new hd sata3 500Gb 3'5. I can configure BIOS , update and set to defoult parameters. when i try to install win7 x64 I have a BSOD same from USB pendrive , same from DVD (dvd player is new too) It seems stop 0x000000124 How can i fix it?!? TIA -atamoro- |
Replies:
Posted By: wardog
Date Posted: 28 Nov 2015 at 1:51am
|
Try re-seating your CPU. How are the CPU temps leading up to it throwing this error? < id="kpm_plugin" ="application/x-KPMPlugin">
|
Posted By: atamoro_ITA
Date Posted: 01 Dec 2015 at 6:09pm
I'm sorry , forget to write test done: -reseat cpu -swap ram -try to boot linux (error on cpu) -change every sigle BIOS from 1.0 to 1.30 -power supply -disconnect everything (usb-front,dvd,vga-pciex) same error cpu temp is about 30-35 'C i'm afraid by foulty mobo or maybe foulty cpu :(( |
wardog wrote:Posted By: atamoro_ITA
Date Posted: 02 Dec 2015 at 6:24pm
|
[SOLVED] it was a FAILED CPU , i try to set a G4400 3,3MHz 1151 and it boot up at first time. |
Posted By: Xaltar
Date Posted: 02 Dec 2015 at 7:00pm
| Check the contact pads on the original CPU, there may be some dirt stuck to one or more of the pins that is preventing proper contact. I usually use Isopropyl Alcohol and a clean cotton cloth to wipe down the underside of my intel CPUs before installing them, just be sure all the alcohol is evaporated before seating the CPU. |