Print Page | Close Window

Rgb looks off white

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=13604
Printed Date: 20 Apr 2024 at 9:21pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Rgb looks off white
Posted By: Adamc03
Subject: Rgb looks off white
Date Posted: 07 Feb 2020 at 10:25am


I have set the RGB to white in the software, but the cover rgb look a bit red when white. This is for the asrock b450m steel legend atx board.



Replies:
Posted By: gizmic
Date Posted: 07 Feb 2020 at 10:40am
that means you have a burnt blue led which is common on heated areas

-------------


Posted By: Adamc03
Date Posted: 11 Feb 2020 at 12:33am
As you can see from the picture, the led is more purple than white.

http://imgur.com/a/Ju0Dpfl


Posted By: Xaltar
Date Posted: 11 Feb 2020 at 2:39am
It's a common issue with RGB LEDs that don't have a dedicated white diode. I can
never get any of my LED (RGB) strips properly white unless I use and RGBw strip.
The best you can usually achieve is to bring down the red slider a little and try
to balance them better. The LED will be dimmer but get at least a little closer
to white.

Also, as Gizmic noted, it can also happen when one of the LED diodes is
burned/weak. Again though, you can adjust sliders to try and balance it.

-------------



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net