Intel Motherboards - PCI Simple Communications Controller

Print Page | Close Window

PCI Simple Communications Controller

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1368
Printed Date: 27 Sep 2024 at 8:02pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: PCI Simple Communications Controller

Posted By: Bob Johns
Subject: PCI Simple Communications Controller
Date Posted: 29 Nov 2015 at 1:20pm

ASROCK H170M-ITX/DL

Device Manager shows yellow exclamation mark on the PCI Simple Communications Controller.

Any suggestions appreciated.

Replies:

Posted By: wardog
Date Posted: 29 Nov 2015 at 2:51pm

The driver for PCI Simple Communications Controller should have been installed when you installed the Intel Management Engine(IME or ME) driver package found on the correct OS's motherboard download page.

I see there are new ME and INF packages just released for your board. ME v11.0.0.1183 and INF v10.1.1.12. Both dated Nov 27 2015.

1. To begin I would use Instant Flash to update your BIOS to 1.40. Making any needed changes until satisfied.

2. Install the latest INF package, v10.1.1.12.

3. Re-run the ME setup program you used and Uninstall that version. Then afterwards run the new ME package v11.0.0.1183.

4. Reboot and all should be well.

< id="kpm_plugin" ="application/x-KPMPlugin">