win7 usb patcher for Z170 Pro4S
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1386
Printed Date: 05 Feb 2025 at 6:40pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: win7 usb patcher for Z170 Pro4S
Posted By: Syrtakimann
Subject: win7 usb patcher for Z170 Pro4S
Date Posted: 01 Dec 2015 at 4:39pm
|
Hello,
I bought an Z170 Pro4S and recognized afterwards that I am not able to install Win7 via USB drive on Samsung SSD 250GB 850 Evo. After starting from USB I got the feedback that the driver is needed. After searching I found the point to use the usb patcher from Asrock, but unfortunately this does not help. Yesterday I downloaded and started it. Choosed my USB drive with Win7 installation and to create a new iso file from which I would create a new usb drive installation. I got the feedback by patcher that it was done successfully, but no iso file were created where I choosed the target.  So I thought, probably it updated the usb drive instead and tried to boot from it and even that was not possible anymore.  It even looks the way that I cannot choose an iso file as source system what is also very disappointing, so my source system can only be the usb drive, which I always has to recreate a new installing Win7 when the problems comes again like above with the patching tool. I ran the patcher on different systems. Once on Win7 64bit and another time on Vista 64bit. Helping hands are welcome. Regards, Edit: SSD is shown and known in Bios |
Replies:
Posted By: wardog
Date Posted: 01 Dec 2015 at 5:06pm
|
http://www.asrock.com/microsite/Win7Install/ That should get you going in the right direction. Hint: PS/2 Simulator < id="kpm_plugin" ="application/x-KPMPlugin">
|
Posted By: Syrtakimann
Date Posted: 01 Dec 2015 at 5:31pm
|
Hello Wardog, you are right, I forgot to change this one, but this was just the case why I did not had my mouse, but keyboard was running what was the most important point. My problem is currently more on the image side with that tool for the Pro4S board. Tool said update were successful, but no iso created in given directory and usb stick is not working anymore with the Win7 install image. As far as I understood I have to use usb patcher in any case for the relation of win7 and my board. Regards, René |
Posted By: VaderSS
Date Posted: 02 Dec 2015 at 7:38am
| I had to use the included disk with my Z170M Extreme4 to install the USB drivers once I got Windows 7 launched. |