B450 Steel Lengend - New Build - Wont Boot
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=13911
Printed Date: 08 Aug 2025 at 7:23pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: B450 Steel Lengend - New Build - Wont Boot
Posted By: GautamS13
Subject: B450 Steel Lengend - New Build - Wont Boot
Date Posted: 25 Mar 2020 at 2:14pm
|
I've built a new system with Ryzen 5 3600 on a new B450 steel legend mobo. Using a Corsair vengeance lpx 2x8GB 3200mhz ram and an adata sx6000 pro m.2 SSD. It's a new build and when I switch on everything is working. The processor fan, cabinet fans all are running. No beeps no sounds, but there's no display on the monitor. It shows no signal and I've connected the monitor through a hdmi from the Zotac GTX 1650 super. Also, tried from the hdmi out on the mobo. The BIOS version is P2.90 and not sure what's the issue, or am I missing something? |
Replies:
Posted By: GautamS13
Date Posted: 25 Mar 2020 at 3:50pm
|
Update: When I removed the Adata m.2 ssd, the system enters the boot screen. If it's installed there's no display output from the mobo. Also updated the BIOS to 3.20 version. No other storages installed. |
Posted By: Xaltar
Date Posted: 25 Mar 2020 at 5:46pm
|
Have you tried the M.2 drive in both slots? Also make sure it is seating properly. ------------- 
|
Posted By: GautamS13
Date Posted: 25 Mar 2020 at 8:00pm
|
Yes I did. Removed the CMOS battery, reset, replugged the graphics card and now everything works fine! Not sure what was the issue. Installed the OS and all good 
|