B450M Pro4 - PBO
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=13922
Printed Date: 17 May 2024 at 1:04pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: B450M Pro4 - PBO
Posted By: bfollett
Subject: B450M Pro4 - PBO
Date Posted: 26 Mar 2020 at 3:57am
|
I'm not sure if I'm just not setting up Precision Boost Overdrive correctly or my Bios version is to blame but when I enable PBO in the bios, the computer won't post and I have to do a bios reset. In bios setup I went into: >Advanced >AMD CBS >NBIO Common Options >Precision Boost Overdrive - ENABLE. Currently my bios version is 3.80 which isn't even available for download. The download site lists versions 3.60 and 3.90. Both aren't recommended for Ryzen 2000 series CPUs so I suspect my 3.80 isn't recommended either(I have a 2600x). Before I was even trying PBO I'd contacted ASRock support about whether I should downgrade my bios to v3.50(the last bios without a "Not Recommended" tag) but they said to I could leave it at v3.80. I'd read that these later bios releases were tweaking the AGESA for 3000 series chips and could hurt performance for earlier chips and on at least one site I read there was a version that broke PBO for the earlier chips. So questions are: Am I setting up PBO incorrectly, or is my bios version to blame and should I go against ASRock supports recommendation and downgrade to v3.50. Thanks, Bob |
Replies:
Posted By: bfollett
Date Posted: 28 Mar 2020 at 2:32am
| (bump) Anyone? One last shot at a forum response before trying to contact Asrock support |
Posted By: rudyzhou2
Date Posted: 02 May 2020 at 8:04am
| same issue here with same mb and Ryzen 2600x. Did you end up figuring out how to get PBO to work? |
Posted By: datonyb
Date Posted: 02 May 2020 at 8:15am
|
same board with a ryzen 1600 AF (its a 2600 in disgiuse) i use version 3.9 its stable with no issues my friend has same board and bios with his 2600x no issues as for the pbo well mines not set 1600af and he dosnt like any form of overclocking so hasnt set his have you tried ryzen master to enable it ? im not sure if using ryzen master works in windows for that though ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: TheTrojan
Date Posted: 29 Sep 2020 at 12:04pm
|
Hi All, I have built several PCs with the ASRock B450M Pro4 and when using Ryzen 1000 and 2000 series CPUs I have found the following. Best overclock achieved with bios version 3.5 Periodic crashing with bios versions greater than 3.5 and PBO enabled. I suggest you ensure you have bios version 3.5 for these CPUs. I used to ignore the ASRock warning regarding bioses after 3.5 but after several issues with OCing and PBO I now only install versions greater than 3.5 with a 3000 series CPU. Similar result for the B450M Steel Legend. ------------- Computer engineer and all round nerd |