new build no power
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14096
Printed Date: 08 Aug 2025 at 11:59pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: new build no power
Posted By: sparkleryan
Subject: new build no power
Date Posted: 13 Apr 2020 at 11:20pm
cpu: Ryzen 1600
mobo: asrock B450 pro4
mem: 16gb (2x8) Aegis DDR4 2400
gpu: R9 Fury X Saphire Nitro
psu: EVGA 500W
case: Corair carbide 88r
No power, no lights, no sounds, nothing. its a brand new build and its completely dead.
please help
|
Replies:
Posted By: sparkleryan
Date Posted: 13 Apr 2020 at 11:40pm
Update:
i found i had wired the panel to the com_1. I rewired the panel to the correct position and tested the unit. fans all come on lights blink but no video output and it cycles power every other minute or so.
|
Posted By: ThreeDee
Date Posted: 14 Apr 2020 at 1:35am
usual stuff .. clear CMOS with power disconnected .. RAM in A2/B2 .. reseat everything (CPU, GPU, RAM) .. make sure PSU plugged into 24 and 8 pin motherboard headers and power plugged into video card.. if still no go .. try 1 ram stick .. and then the other if still not booting.
If still not booting .. remove everything from case and place on non-conductive surface and plug everything in and see if it boots out of the case.
-------------
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
Posted By: sparkleryan
Date Posted: 14 Apr 2020 at 5:41am
Update went step by step trying the different cmos things and then just broke down and pulled it piece by piece testing each part in a known working computer.
THE RAM WAS BAD, both sticks neither of them would boot even by themselves so i replaced the ram rebuilt the system and boom it works.
|
|