Newly built PC BOOTS but NO VIDEO SIGNAL
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14166
Printed Date: 09 Aug 2025 at 2:03am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Newly built PC BOOTS but NO VIDEO SIGNAL
Posted By: Rumy_
Subject: Newly built PC BOOTS but NO VIDEO SIGNAL
Date Posted: 22 Apr 2020 at 1:29pm
Hello everyone,
Forgive me ahead of time but this is my first PC I've built. Specs are as follows;
MOBO: ASROCK B450 GAMING ITX/AC
CPU: AMD AMD RYZEN 5 2600X
GPU: ASUS GTX1660 SUPER O6G PHOENIX
RAM: G.SKILL 16GB 2X8 D4 3000 TRIZ RGB
STORAGE: SAMSUNG E 500GB 970EVO NVME M.2 SSD
PSU: CORSAIR RM650 80+G
I'm pretty sure everything is plugged in correctly because when I boot it up GPU light indicates power and fan continues to spin along with the CPU fan and case fans. RGB on RAM remains on but I am getting no video signal to my monitor. Everything remains on and spinning until I manually power it down. I have used 3 different HDMI cables from MOBO's HDMI to monitor and still no signal. Each of the HDMI cables work no problem with other devices. Alternatively I have DSUB IN on the back of the monitor and DISPLAY PORT on MOBO. PLEASE HELP! Thanks ahead of time.
|
Replies:
Posted By: _Mael_
Date Posted: 23 Apr 2020 at 1:58am
|
connect the hdmi cable into the graphics card port, not the motherboard port, the motherboard ports are only used and your cpu is APU, 2200g, 2400g or A-series apu. The 2600X does not have integrated graphics. Therefore, use the ports of your graphics card
|
|