Bios not detecting USB with Windows
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14202
Printed Date: 11 May 2024 at 10:55am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Bios not detecting USB with Windows
Posted By: dannykujo
Subject: Bios not detecting USB with Windows
Date Posted: 25 Apr 2020 at 10:02am
|
I recently installed the media creation tool at the Microsoft website. Before doing this, I formatted the USB to FAT32. I plugged in the USB to every port including the Mobo and front ports. It does not appear in the boot options when I get into bios. I am basically stuck since I can't install the OS to my newly built pc. Mobo: Asrock B450m Pro4 |
Replies:
Posted By: datonyb
Date Posted: 25 Apr 2020 at 10:08am
|
my wife has this very same motherboard it should just automatically boot from the usb when it dosnt see an o/s on hdd reset bios to defaults place a formatted hdd/sdd in sata or nvme and switch it on the default bios settings should look for hdd and then go to usb drive i would also retry to make the usb drive with a fresh copy of windows media creation (it might have corrupt bootable files) ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: dannykujo
Date Posted: 25 Apr 2020 at 10:51am
| I just reset the bios to defaults. I also did a new windows creation tool as well. Formatted it the usb the same way (fat32). Turned on my pc and it didn't boot automatically. Checked in bios and only my nvme m.2 ssd shows up. Its the only boot option appear. Not sure what I did wrong |
Posted By: Reset
Date Posted: 25 Apr 2020 at 7:30pm
| Press F11 while booting and start the USB stick as "UEFI", then it works |
Posted By: dannykujo
Date Posted: 25 Apr 2020 at 10:44pm
| I tried hitting f11 when turning on the pc. There is no option to to start the usb as UEFI because it does not appear there. All I see is "Please select boot device NVME:...." "Enter setup" "Boot Default" |
Posted By: datonyb
Date Posted: 26 Apr 2020 at 1:35am
|
try a different usb stick ? ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |