no more Post after 8 Months
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14222
Printed Date: 09 Aug 2025 at 3:51am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: no more Post after 8 Months
Posted By: joxxor
Subject: no more Post after 8 Months
Date Posted: 27 Apr 2020 at 3:02pm
|
Hallo there, last Week I installed a new m.2 SSD. Sadly my System won't post anymore after this. here is my Setup: - X370 Taichi Bios v 6.2 (newest Asrock Bios) - Ryzen 5 3600 - Gskill Ripjaws V 3200 Cl16 @ 3333 Mhz 2 x 16 GB - MSI Gaming Gtx 1070 TI In this Setup my System ran stable for over half a year. After installing the SSS I wouldn't get a post anymore. Of course I CMOS-Cleared a lot after every one of the following changes: I tried different RAM Combinations (1 RAM, different slots, dual channel different slots). No Post I tried reinstalling the ryzen 3600. No Post I tried installing my old ryzen 1600x. POST! WTF? Bought a new Ryzen 3600 because I blamed the CPU. NO POST, WTF? So 1600x with both GSKILL Modules @ 3200 running perfectly. Is it the Mainboard then? Other interesting facts: tried other ram modules (Crucial ballistix 2 x 8) 1600x wont post with the Ballistix 3600 posts successfully with only one Module installed. Dual Channel won't post. thinking about buying a new Mainboard now, but why is 1600x running fine and 3600 won't post, after over half a year? Thank you guys for any advise! |
Replies:
Posted By: joxxor
Date Posted: 27 Apr 2020 at 4:46pm
| little Edit: I also tried booting without the m.2 ssd without success |
Posted By: datonyb
Date Posted: 27 Apr 2020 at 9:10pm
|
ok lets try to work this out with the 1600 and no hard drive and one gskill in a2 unplug from wall , and pop out the cmos coin battery , press and hold the case power button for 30 secs to properly reset the bios then boot the system as is (remember this could take 30 seconds for first boot) from your description this should boot ok, (but you also have wiped all traces of recent ram training memory etc from bios) now fit the 3600 and reboot with no ssd and the same rams stick in a2 this should also now boot enter bios then save exit now fit the other gskill in slot b2 im guessing you should get the boot now so your back to where you was now the question for you ,due to leaving out the info in first post please tell us what new ssd you used and which m2 socket you installed it to ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: datonyb
Date Posted: 27 Apr 2020 at 9:13pm
|
the above may sound silly to you but humour me i also have the x370 taichi and with the 3800x i have to go thru this procedure after bios flash or reset if i try it with 2 sticks ofram first boot it wont do athing............ ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: joxxor
Date Posted: 27 Apr 2020 at 11:16pm
|
thx so far for reading and answering. I will try this out immediatly. But first let me try to summarize my first posting in a tl;dr version ;) original and working setup upon installing an adata xpg sx8200 pro 1TB in m2.1 x370 taichi, ryzen 5 3600, gskill ripjaws 5 2x16 GB DDR4-3200, CL16-18-18-38, msi 1070 ti After installing adata xpg sx8200 ssd in m.2 Slot 1: Bootloop without Post/Bios on Error Code DrDebug: 33(ram in A2 and B2), b6(just one stick in any) Same Problem with: new 3600 cpu // without m2.1 Ssd // with crucial ballstix dual ram in A2+B2. No Problem with: 3600+single-channel Crucial stick OR 1600x dual-channel Ripjaws I'll keep u up2date |
Posted By: datonyb
Date Posted: 27 Apr 2020 at 11:45pm
|
yes the object is too try and clear some bug in bios caused with the nvme drive hence asking you too remove the cmos battery and unplug from wall i have same board the cmos clear button isnt so good at .............cmos clear  ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: datonyb
Date Posted: 27 Apr 2020 at 11:48pm
|
i havnt tried a xpg 8200 in my board but i know the 512gb version works in the asrock b450m pro4 without issue ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: joxxor
Date Posted: 28 Apr 2020 at 1:36am
booted with 1600, no drives, one stick in A2 unplugged, removed battery, waited, pressed power button a few times. plugged in, bootet perfectly. unplugged, removed 1600, fitted 3600. Bootloop on Code b6, no post/bios |
datonyb wrote:Posted By: joxxor
Date Posted: 28 Apr 2020 at 1:40am
|
I also tried to downgrad Bios to 5.8 and back to v6.2. I think the board got some damage. Well, it's 2 and a half years old. Maybe it got some elecrostatic burst when I mounted the nvme ssd |
Posted By: ThreeDee
Date Posted: 28 Apr 2020 at 1:51am
|
Yeah, should wear a grounding strap or at least grab a hold of something metal to discharge any static electricity built up in your body before touching anything on the inside or going into your case. ------------- |Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15| |
Posted By: cx5
Date Posted: 29 Apr 2020 at 1:31pm
Recently my 3800x died, dr debug post error 33,7a,3b,b6. When to warranty and confirmed dead and replace a new. With replaced new 3800x, when single GPU is in slot 2 and not slot 1 with a clearED cmos also same dr debug port error 33,7a,3b,b6. Must put GPU in slot 1, boot to bios, change pcie 1x16 to 2x8, then must not clear cmos, shutdown, swap CPU to slot 2 and post OK boot windows game not crash. ------------- x370taichi@3.50gen4 AX750 Optane900P SN770 3800x PosdonZro4 BarrowPWM-17w>420x140x28 XFX SWFT319 6900XT MSI RX560 LP to get Fluid Motion BlueskyFRC 75hz |