X470 taichi dr debug codes
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14340
Printed Date: 19 Jul 2025 at 4:51pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X470 taichi dr debug codes
Posted By: Jusechas
Subject: X470 taichi dr debug codes
Date Posted: 11 May 2020 at 9:59am
|
Hi, This is my first time building a pc and everything was fine until at the moment I turn on the pc. I don?™t receive any signal from it, after read the manual carefully I check the Dr. Debug codes and show me the following codes: 27, 36 and 02. After read the manual apparently is Memory problem, I tried switching the Ram and put one Ram only as well but still don?™t show me any signal at all. I don?™t know if I am missing steps at the moments of troubleshooting but I really don?™t know what to do. I have a AMD Ryzen 5 3600, Motherboard ASRock x470 taichi, G.Skill Ripjaws V series 16gb (2x8gb) DDR4 3200, AMD Radeon 5600xt, EVGA 500w |
Replies:
Posted By: datonyb
Date Posted: 11 May 2020 at 9:16pm
|
does the motherboard box say 'ryzen 3000 ready' on the outside and secondly folowing the picture in the manual locate the bios chip on your board and read what version of bios the 'sticker' on bios chip says yours needs to be 3.4 or higher to boot the 3600 cpu ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: Jusechas
Date Posted: 11 May 2020 at 10:34pm
|
Hi, The motherboard say ?śryzen 3000 ready??with a orange sticker in the box. The Bios sticker in the motherboard have a P3.20 but at the same time is look like with a sharpie they cover the number. Could probably be that but will not the pc in general not turn on if the cpu is not compatible for the motherboard? And at the moment the pc is turn on the Dr. debug show some numbers which following the manual say is memory problem but at this point probably could be the cpu too. |
Posted By: datonyb
Date Posted: 12 May 2020 at 12:23am
|
the bios sticker is put on when it leaves the factory so it left with 3.2 (not a bios for ryzen 3000) but the box has a sticker saying ryzen ready AND someone sharpied the bios sticker we can assume the retail sypply chain flashed the bios ........ now how good was it ? back to basics place one ram stick in A2 remove all ssd/hdd have only the cpu 1 ram stick graphics card fitted and try to boot ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |