No Boot / No Image 2
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14407
Printed Date: 16 Aug 2025 at 6:56am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: No Boot / No Image 2
Posted By: PapaGus
Subject: No Boot / No Image 2
Date Posted: 16 May 2020 at 8:59am
Hello all,
My son & I are building a new PC
With the MB,CPU, & RAM installed, Power on the PC.
We get lights, & fans.
But no beeps or HDMI / VGA video to any monitor we connect.
The monitor is on and only says "No Signal"
Per email from ASRock Support we ran through multiple tests.
And received a RMA to replace the MB.
We replaced the MB with the new new one they sent, but, we have the exact same issue.
I saw another post that said to try 1 stick RAM
And try remove / replace the CMOS Battery
I tried both
I re-seated the CPU, and the HDMI cable ends.
--No change.
Any other ideas??
We have the
ASRockB450M-HDV R4.0 MB
AMD RZEN 3 3200G with Radeon Vega 8 Graphics CPU
2 sticks Corsair Vengeance LPX DDR4 8GB RAM 3200MHz
and a PCI WiFi card (I left this out during tests)
-------------
Thank You for your help
PapaGus & Sons
|
Replies:
Posted By: cclim
Date Posted: 12 Sep 2020 at 6:31pm
|
Hi, try single ram per slot until you can boot in BIOS, THEN Set dram speed from auto to "2400".My case same exactly yours and i solved it by this method. Try it.
|
|