AMD Motherboards - debug error 10 then swap CPU and error 0E

Print Page | Close Window

debug error 10 then swap CPU and error 0E

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1442
Printed Date: 22 Dec 2024 at 3:52pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: debug error 10 then swap CPU and error 0E

Posted By: bampot
Subject: debug error 10 then swap CPU and error 0E
Date Posted: 07 Dec 2015 at 8:40am

Asrock 890GX Pro3 MB with AMD FX-8150 CPU, R9 280X GPU.

Had system working with no problems for a year - then one day turn on and won't post with debug code 10.

Disconnected everything, reset all connections and reseated CPU, GPU and RAM - same story with debug code 10. Pulled everything out and breadboarded with MB, CPU PSU and one stick of RAM - same issue. Tried diff sticks of RAM in all slots and same issue. Swapped CPU for a Phenom II and now get different debug code 0E. Question is does this different debug code help identify the problem as the CPU or the MB? I don't have another AMD 3+ MB nor another PSU - just trying to narrow down the possibilities before I buy replacements.

Thanks for any insight you can share.

Replies:

Posted By: wardog
Date Posted: 07 Dec 2015 at 9:37am

This may sound like a way out there solution yet put a new CMOS battery in it.

Posted By: bampot
Date Posted: 07 Dec 2015 at 10:37am

gave it a try but no joy....

Posted By: wardog
Date Posted: 07 Dec 2015 at 11:24am

Yea, at this point you might have to reset/clear your BIOS too.

Also, OE, try another video card.

Posted By: bampot
Date Posted: 07 Dec 2015 at 11:34am

right now I'm not using the GPU just onboard graphics