Intel Motherboards - H110M-HDVD3 Windows 7 install problem

Print Page | Close Window

H110M-HDVD3 Windows 7 install problem

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1443
Printed Date: 21 May 2024 at 3:26pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: H110M-HDVD3 Windows 7 install problem

Posted By: GZed
Subject: H110M-HDVD3 Windows 7 install problem
Date Posted: 07 Dec 2015 at 2:15pm

It appears to be impossible to install Windows 7 Pro from a bootable disk when running a H110M-HDVD3 motherboard. USB keyboards and mice do work once you arrive at the Windows 7 setup language selection screen.

I have tried everything below:

- BIOS versions 1.10, 1.20 and 1.30.

- Different keyboards and mice.

- All of the Legacy USB settings - Enabled, Disabled, Auto and UEFI setup only.

- The USB 2.0 and USB 3.0 ports.

Nothing works to allow a USB keyboard or mouse to work at the Windows 7 setup language selection screen. However the mouse and keyboard do work in the BIOS/UEFI screens, so I know that the motherboard and system are working at the basic level.

So what's the deal here? Do I have a faulty board or is this a known issue when trying to install Windows 7 from a boot disk?

Replies:

Posted By: Xaltar
Date Posted: 07 Dec 2015 at 2:31pm

You will need to use ASRock's USB patcher to install windows 7 on an intel 100 series board.

ASRock has a microsite with details http://www.asrock.com/microsite/Win7Install/" rel="nofollow - here .

Posted By: GZed
Date Posted: 07 Dec 2015 at 2:55pm

Thanks heaps for the speedy reply and the great info. Love your work.

Posted By: RobertS
Date Posted: 03 Oct 2016 at 5:37pm

Hi, if´v the same problem.
After running win7usbpatcher to usb there was no system to start from.
After running win7usbpatcher to cd, the pachdimg.iso burned to a dvd, then i got the message "missing bootmsg".
I used two differend computers to do this work, the same result.
What else can be done?

Posted By: barrubba
Date Posted: 24 Feb 2017 at 6:36am

" rel="nofollow - I've used USB patcher but now starting Windows, don't recognise any USB drive.. So I can't install any driver
Which is the correct USB setting in bios?
Thanks

Posted By: aeshmo
Date Posted: 06 Dec 2017 at 5:53am

Im having the exact same problem but this time with windows 10..

Posted By: huysan85
Date Posted: 18 Dec 2017 at 3:45pm

Dear All here,

Actually i faced up the Asrock H110M-HDV Motherboard to install Windows 7 issued.

That's keep repeat bluescreen with certain error message.

For the further detail as below:
Intel Core i3-7100 Processor

Asrock H110M-HDV Motherboard

Apacer 4GB DDR4 2133Mhz CL15 Memory

Team 120GB SATA SSD

Optical Drive & Normal as others

For this issue, i think maybe the most people was face up the latest motherboard is cannot be support lowest Operating System.

But what i done is i can done for the first times, and reimage to Win 7.

The problem is the pc will automatically blue screen during use the pc.

Recently that is had a bit seriously for the issue, load windows automatically restart, stuck in welcome screen and blank, blue screen with some else error message regarding hardware issue / memory management issue.

I need the helps too from the professional adviser to give the solution to fix this issue.

-------------
Best Regards,
Jacky