Code 65-Everything New! Z390
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14548
Printed Date: 09 Sep 2025 at 9:27pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Code 65-Everything New! Z390
Posted By: czander475
Subject: Code 65-Everything New! Z390
Date Posted: 01 Jun 2020 at 6:24am
HELP!!!
Brand-new Z370 Phantom gaming X will not boot. Getting code 65. Have the computer running at a bare minimum single stick ram 8gb Geil, on board video on a test bench. I-9 processor, Corsair 1200 HX power supply, 2- M.2 250gb HP NVME drives.
Cleared CMOS same code 65
Tried backup power supply same code 65
Tried ADATA 2333 8gb ram same code 65
Reset CMOS after every change even tried clearing CMOS and pulling the battery. Any ideas? I am pulling my hair out??forumCodes=True
|
Replies:
Posted By: RLGL
Date Posted: 01 Jun 2020 at 10:00pm
Check the bios version that your board has. Next go to the CPU support list for your board, likely the bios needs to be upgraded to a later version to support the I9.
-------------
Asrock Z370 Gaming K6,Intel i7 8700K,
Asrock x570 Taichi
|
Posted By: czander475
Date Posted: 02 Jun 2020 at 3:52am
Unfortunately code 65 pops up during the boot process and it just hangs. I have no access to the bios. I am becoming strangely frustrated with
Asrock. I just returned a brand-new Z 390 Phantom gaming 9 and spent the extra money to get the 10.
The 9 would not set up the raid correctly. You could set up the raid type You would pick the hard drives and then the bios would freeze up. I tried support if that's what you want to call it. So I returned the board and got the upgraded version 10.
Now version 10 won't boot and hangs up at code 65. This is my first experience using Asrock motherboards but certainly not my first experience at building computers. I probably built over 100. I normally use MSI or Asus motherboards. They actually have telephone numbers for support. What a novel idea!
I get no support through the Asrock email support and I've had enough. When things go well customers are much more likely to say very little.
When a customer has an issue with a product, handled correctly they will have a customer for life. Incorrectly, with today's Internet, chat rooms, scoring systems and reviews they certainly can influence the purchasing decision of other customers.
I run a consulting company called Who's Checking? While we specialize in the automotive industry we have also worked with other companies. Good customer service is good customer service. Whether you are selling jellybeans or motherboards.
Maybe Asrock should consider some training.
In the meantime I think I'll box this back up and go for another manufacturer.
Charles Zander
President
www.whoschecking.com
|
Posted By: RLGL
Date Posted: 02 Jun 2020 at 5:13am
The bios version is on a sticker that is on the board. You will probably have this issue with all mfgrs product. This is one of the hazards of DIY. As far as cust svc is concedrned. Go to Asus and good luck...........
-------------
Asrock Z370 Gaming K6,Intel i7 8700K,
Asrock x570 Taichi
|
Posted By: watabe
Date Posted: 16 Feb 2024 at 3:14am
next time guys get g_____ no ram ECC issue.
In my life i juts got like total 1Tb of DDR4 stick that dont works in Asus rack motherboard
Just right now try to 4x 32Gb work ok
insert micron 64Gb 65 issue
insert 16Gb 65 issue
insert 16gb diffrent 65 issue
Sam was with ryzen when try to get 128Gb ram on asus rack same paifull process only geting "Memory QVL" remove 65 er other errors.
In my case i can just insert this ram into Dell epyc server and you are just screw
|
Posted By: watabe
Date Posted: 16 Feb 2024 at 3:30am
|
my bad just mix RDIMM with LRDIMM adn this is reaosny why got this code 64
|
|