Asrock bm450 hdv mobo
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14575
Printed Date: 09 Aug 2025 at 1:50pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Asrock bm450 hdv mobo
Posted By: jmartinez0719
Subject: Asrock bm450 hdv mobo
Date Posted: 04 Jun 2020 at 1:09pm
So i recently did a build with this motherboard (cpu amd athlon 3000g) and it booted fine but while i was installing drivers it went into no signal from the gpu (amd rx570).
I was checking their website and it specifically says to not use bios version 3.70 for Raven Ridge Cpus which the cpu i have is.
This version came pre installed with the motherboard. My question is, Is this the root of my problem or is something else the problem.
The pc works just fine without the gpu but i get absolutely no signal if i plug up to the gpu.
Also i cant seem to revert to a previous bios. please help
|
Replies:
Posted By: ThreeDee
Date Posted: 04 Jun 2020 at 4:54pm
BIOS isn't your issue .. make sure your RX570 is properly seated into the PCIe slot and and you have power plugged into it .. and make sure your monitor cable is plugged all the way into your RX570 as well ..
If still no signal, next step would be to try the RX570 in another machine and see if it works .. could be a bad card
-------------
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|