Intel Motherboards - x99 sw-e error code 62

Print Page | Close Window

x99 sw-e error code 62

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1462
Printed Date: 24 Dec 2024 at 3:52am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: x99 sw-e error code 62

Posted By: twisterice
Subject: x99 sw-e error code 62
Date Posted: 10 Dec 2015 at 2:40am

Hello,

I try to open a new post in the hope to have more opportunity to help...

I'm finishing the possibilities---help me please

i've just insert the LSI MegaRaid 9240-4i card...i try to boot but in the error codes of dr.debug i see error code 62 ...in the manual (page 39) the message is: Chipset initialization error. Please press reset or clear CMOS.
I've cleared the cmos as indicated in page 31 but nothing is changed...i've also tried to remove the battery, move the jumper and after 1 minute replace both at the right place...if i try to boot....start with asrock logo and menu option...i try to push cancel button to enter the bios but the system not respond and go on...up to load the raid card...and here i see some words (lsi...model ..number) but here the system is blocked...
So after i remove the raid card and i can enter into the bios...all parameters seems to be ok...what's wrong? i need to make some settings in the bios to load correctly the raid card?