Always booting into BIOS
Printed From: ASRock.com
Category: Technical Support
Forum Name: HTPC&Gaming Barebone&Others
Forum Description: Question about HTPC&Gaming Barebone&Others
URL: https://forum.asrock.com/forum_posts.asp?TID=1470
Printed Date: 22 Nov 2024 at 12:25am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Always booting into BIOS
Posted By: Bluesmanuk
Subject: Always booting into BIOS
Date Posted: 10 Dec 2015 at 1:46pm
|
I seem to have made a change that means that whenever my Beebox N3150 boots up it always boots into the BIOS. Can anybody advise how I can disable this? Thanks. ------------- Beebox N3150 |
Replies:
Posted By: ASRock Expert
Date Posted: 12 Dec 2015 at 10:09pm
|
Disable UEFI boot or make an UEFI based OS install. ------------- 990FX Extreme 9 MOD P1.70 AMD FX 8120 4GHz 1.25V Thermalright HR-02 Patriot Viper 2x4GB 2133MHz Samsung 850 EVO 250GB MSI R7970 TFIII 3GB CORSAIR VX550W LanCool K62 Dragonlord ASUS Xonar D2X |
Posted By: parsec
Date Posted: 13 Dec 2015 at 2:49am
That normally happens when a UEFI/BIOS setting won't allow the board to boot, as you are experiencing. You will need to clear the UEFI/BIOS on the board in your PC. I'm not sure how that is done on your PC, and I don't have time to check the manual right now, but I will later if you're not sure how to do that. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Bluesmanuk wrote:Posted By: Bluesmanuk
Date Posted: 13 Dec 2015 at 12:41pm
I'm afraid that I don't get what you mean. There is no option that I can see to disable UEFI boot. The boot options show the Boot Option #1 to be my SATA SSD and whilst I am in the BIOS, when I select exit and save settings from the menu, Windows boots up as usual. In terms of OS install is concerned I simply created a bootable USB stick that Windows installation ran from and I don't recall any information during the installation that differentiated between a UEFI based installation and any other type. ------------- Beebox N3150 |
Posted By: Bluesmanuk
Date Posted: 13 Dec 2015 at 12:44pm
Thanks, I reset to default but it doesn't change anything and I had a look through the manual but could not find anything. I have discovered something though and that this only happens when power to the unit is restored each day as I prefer to have all devices switched off completely when not in use. If I restart when already booted into Windows or shutdown and restart again using the remote then the machine boots straight into Windows as normal. ------------- Beebox N3150 |