Ram hardware reserved on b450 Pro4
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14702
Printed Date: 26 Dec 2024 at 5:38pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Ram hardware reserved on b450 Pro4
Posted By: nad
Subject: Ram hardware reserved on b450 Pro4
Date Posted: 16 Jun 2020 at 4:25pm
|
Hi all, i'm using Asrock B450 pro4 and R5 2600 i'm using Gskill Trident Z 2x16gb 2400MHz its read as 32gb running on dual channel A2, B2 in bios but when i check in task manager it say 16GB while the others 16GB of ram is labeled as "hardware reserved" try everything from unchecked max memory from msconfig,ipdate bios, reinstall the windows, and i can't use it at 2400MHz everytime i try to change the speed in XMP PC wont boot (fail three times and boot but with 2133MHz) tried another set of ram (2x8GB) and the problem still occurs i'm sure there is no problem with the ram kit so i'm thinking maybe i get a faulty MB, can i claim warranty for this issue? or maybe there are some troubleshooting that i miss? any feedback is appreciated |
Replies:
Posted By: ThreeDee
Date Posted: 16 Jun 2020 at 8:20pm
|
is this a fresh install of windows 10 64bit? ------------- |Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15| |
Posted By: datonyb
Date Posted: 16 Jun 2020 at 10:08pm
|
its usually (99% of the time) one of the ram sticks is not fully inserted into the ram slot if you have tried another kit then its safe to assume you have technically reinserted ram into slots so i suggest removing the cpu and try to refit that (i tend to place a finger on cpu and press down and away from socket hinge gently while closing the lever) ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: new_user
Date Posted: 09 Jan 2021 at 9:05pm
|
Hi I had the same problem, spent a couple of days on it. I upgraded the bios to latest version, that on it's own did not help. Then I moved the DIMMs to slots A1 and A2 and everything started working, and several days later it is still running fine and I see all my memory. The manual insists the DIMMs should be in A2 and B2 but I could not get that working no matter what I tried. My best guess right now is that the manual is outdated. In case you hit the next problem, like I did - my DIMMs are meant to run at 3200MHz, but the MOBO was only picking up 2133MHz as speed - in the end I overclocked them in BIOS up to 2800MHz and increased the voltage to 1.35V to make it all work. I have not tried pushing the speed higher, likely more can be done but frankly I cannot be bothered, this is plenty fast for what I need. |