No Display on First start up
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=14715
Printed Date: 09 Aug 2025 at 9:37pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: No Display on First start up
Posted By: Tigersdeth
Subject: No Display on First start up
Date Posted: 18 Jun 2020 at 3:25pm
| In just built a fresh PC with a Ryzen 3 3200G 2nd gen processor, B450M steel legend Mobo, 2 8gig ram in slots A2 and B2. No graphics card yet. It turns on and the lights RGB lights are on. I'm getting ready to update the BIOS and install windows 10 64bit but I'm not getting anything on my monitor, I'm using an HDMI monitor port for visual. What could be wrong? |
Replies:
Posted By: Xaltar
Date Posted: 18 Jun 2020 at 6:12pm
|
Make sure your BIOS supports the 3200g (there should be a sticker on the BIOS chip with the version printed on it from the factory). ------------- 
|
Posted By: Notme
Date Posted: 20 Jun 2020 at 10:16pm
|
BIOS needed for your Rizen 3200G on that board is 2.10. Assuming that is correct, I did just have a similar issue on an ASRock B450M Pro4 board yesterday using the same processor and also using HDMI output. Mine was solved by swapping the RAM around. I first pulled all but the A2 stick. That didn't help. Finally, I swapped a different stick into A2 and it posted. I put the "problematic" stick into B2, and it worked. I suspect that I just hadn't seated it properly, but there may have been something weird about that stick in A2. |
Posted By: Tigersdeth
Date Posted: 21 Jun 2020 at 3:36am
| The motherboard came with the most recent update 2.9 |